nwa3d_a31_e.inst.cfg 3.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124
  1. [general]
  2. version = 4
  3. name = 0.6 Engineering Quality
  4. definition = nwa3d_a31
  5. [metadata]
  6. setting_version = 9
  7. type = quality
  8. quality_type = Engineering
  9. weight = -2
  10. global_quality = True
  11. [values]
  12. layer_height = 0.28
  13. layer_height_0 = 0.4
  14. line_width = 0.6
  15. wall_line_width_0 = 0.6
  16. initial_layer_line_width_factor = 100
  17. wall_thickness = 1.2
  18. wall_0_wipe_dist = 0.2
  19. roofing_layer_count = 1
  20. top_bottom_thickness = 1.2
  21. top_layers = 5
  22. bottom_layers = 3
  23. top_bottom_pattern = lines
  24. top_bottom_pattern_0 = lines
  25. wall_0_inset = 0
  26. optimize_wall_printing_order = False
  27. outer_inset_first = False
  28. alternate_extra_perimeter = False
  29. travel_compensate_overlapping_walls_enabled = True
  30. travel_compensate_overlapping_walls_0_enabled = True
  31. travel_compensate_overlapping_walls_x_enabled = True
  32. wall_min_flow = 0
  33. fill_perimeter_gaps = everywhere
  34. filter_out_tiny_gaps = True
  35. fill_outline_gaps = True
  36. xy_offset = 0
  37. skin_no_small_gaps_heuristic = True
  38. skin_outline_count = 1
  39. ironing_enabled = False
  40. infill_sparse_density = 15
  41. zig_zaggify_infill = False
  42. infill_multiplier = 1
  43. infill_wall_line_count = 0
  44. infill_overlap = 10
  45. skin_overlap = 5
  46. infill_wipe_dist = 0.15
  47. gradual_infill_steps = 0
  48. infill_before_walls = False
  49. infill_support_enabled = False
  50. max_skin_angle_for_expansion = 90
  51. material_diameter = 1.75
  52. default_material_print_temperature = 220
  53. material_print_temperature = 220
  54. material_print_temperature_layer_0 = 220
  55. material_initial_print_temperature = 220
  56. material_final_print_temperature = 220
  57. default_material_bed_temperature = 50
  58. material_bed_temperature = 50
  59. material_flow = 100
  60. retraction_enable = True
  61. retract_at_layer_change = False
  62. retraction_amount = 5
  63. retraction_speed = 45
  64. retraction_extra_prime_amount = 0
  65. retraction_min_travel = 1.2
  66. retraction_count_max = 90
  67. retraction_extrusion_window = 5
  68. limit_support_retractions = True
  69. switch_extruder_retraction_amount = 16
  70. switch_extruder_retraction_speeds = 20
  71. speed_print = 40
  72. speed_travel = 150
  73. speed_layer_0 = 10
  74. speed_travel_layer_0 = 40
  75. speed_slowdown_layers = 2
  76. speed_equalize_flow_enabled = False
  77. acceleration_enabled = False
  78. jerk_enabled = False
  79. retraction_combing = off
  80. travel_retract_before_outer_wall = False
  81. retraction_hop_enabled = False
  82. cool_fan_enabled = True
  83. cool_fan_speed = 100
  84. cool_fan_speed_0 = 0
  85. cool_fan_full_layer = 3
  86. cool_lift_head = False
  87. support_enable = True
  88. support_type = everywhere
  89. support_angle = 50
  90. support_pattern = grid
  91. support_wall_count = 0
  92. zig_zaggify_support = False
  93. support_infill_rate = =10 if support_enable else 0 if support_tree_enable else 10
  94. support_infill_angles = [0]
  95. support_brim_enable = True
  96. support_brim_line_count = 5
  97. support_z_distance = 0.34
  98. support_xy_distance = 0.7
  99. support_xy_distance_overhang = 0.2
  100. support_bottom_stair_step_height = 0.3
  101. support_bottom_stair_step_width = 5.0
  102. support_join_distance = 2.0
  103. support_offset = 0.2
  104. gradual_support_infill_steps = 0
  105. support_roof_enable = True
  106. support_bottom_enable = False
  107. support_roof_height = .45
  108. support_roof_density = 45
  109. support_roof_pattern = grid
  110. support_fan_enable = False
  111. support_use_towers = True
  112. support_tower_diameter = 3
  113. support_tower_roof_angle = 65
  114. adhesion_type = skirt
  115. skirt_line_count = 2
  116. skirt_gap = 3
  117. meshfix_union_all = True
  118. meshfix_union_all_remove_holes = False
  119. meshfix_extensive_stitching = False
  120. meshfix_keep_open_polygons = False
  121. multiple_mesh_overlap = 0.16
  122. carve_multiple_volumes = False