um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg 1.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. [general]
  2. version = 4
  3. name = Sprint
  4. definition = ultimaker_s3
  5. [metadata]
  6. setting_version = 17
  7. type = quality
  8. quality_type = superdraft
  9. weight = -4
  10. material = generic_tough_pla
  11. variant = AA 0.8
  12. [values]
  13. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  14. cool_fan_speed_max = =100
  15. cool_min_speed = 2
  16. gradual_infill_step_height = =3 * layer_height
  17. infill_line_width = =round(line_width * 0.75 / 0.75, 2)
  18. infill_pattern = cubic
  19. layer_height_0 = 0.4
  20. line_width = =machine_nozzle_size * 0.9375
  21. machine_nozzle_cool_down_speed = 0.75
  22. machine_nozzle_heat_up_speed = 1.6
  23. material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
  24. material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
  25. material_print_temperature = =default_material_print_temperature + 5
  26. prime_tower_enable = False
  27. raft_margin = 10
  28. retract_at_layer_change = False
  29. speed_infill = =math.ceil(speed_print * 30 / 30)
  30. speed_print = 30
  31. speed_topbottom = =math.ceil(speed_print * 20 / 30)
  32. speed_wall = =math.ceil(speed_print * 25/ 30)
  33. speed_wall_0 = =math.ceil(speed_print * 20 / 30)
  34. support_angle = 70
  35. support_line_width = =line_width * 0.75
  36. support_xy_distance = =wall_line_width_0 * 1.5
  37. top_bottom_thickness = =layer_height * 4
  38. wall_line_width = =round(line_width * 0.75 / 0.75, 2)
  39. wall_thickness = =wall_line_width_0 + wall_line_width_x