Cura/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg

[general]
version = 4
name = Normal
definition = ultimaker2_plus

[metadata]
setting_version = 17
type = quality
quality_type = slightlycoarse
weight = -1
material = generic_pc
variant = 0.6 mm

[values]
adhesion_type = raft
cool_fan_speed = 50
cool_fan_speed_min = 0
cool_min_layer_time = 3
cool_min_speed = 8
infill_overlap = 5
infill_sparse_density = 35
layer_0_z_overlap = 0.22
raft_airgap = 0.52
raft_base_line_spacing = 2.4
raft_base_line_width = 1.2
raft_interface_line_spacing = 1.4
raft_interface_line_width = 1.2
raft_margin = 15
raft_surface_line_width = 0.6
raft_surface_thickness = 0.15
speed_layer_0 = =math.ceil(speed_print * 30 / 45)
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 20 / 45)
speed_travel = 150
speed_wall_0 = =math.ceil(speed_print * 30 / 45)
speed_wall_x = =math.ceil(speed_print * 40 / 45)
support_angle = 45
support_enable = True
support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
support_line_distance = 3.5333
support_pattern = lines
support_z_distance = 0.21
top_bottom_thickness = 0.75
wall_thickness = 1.06
speed_infill = =math.ceil(speed_print * 45 / 45)