imade3d_jellybox_fine.inst.cfg 2.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = imade3d_jellybox
  5. [metadata]
  6. setting_version = 17
  7. type = quality
  8. quality_type = high
  9. weight = 1
  10. global_quality = True
  11. [values]
  12. adhesion_type = skirt
  13. layer_height = 0.1
  14. layer_height_0 = 0.3
  15. retraction_hop = 0.1
  16. bottom_thickness = =top_bottom_thickness
  17. coasting_enable = True
  18. coasting_min_volume = 2
  19. coasting_volume = 0.032
  20. cool_fan_speed_max = =cool_fan_speed
  21. infill_before_walls = False
  22. infill_line_width = =round(line_width * 1.5, 2)
  23. infill_pattern = zigzag
  24. infill_sparse_density = 25
  25. line_width = =machine_nozzle_size
  26. material_bed_temperature = =default_material_bed_temperature
  27. material_bed_temperature_layer_0 = =material_bed_temperature + 5
  28. material_print_temperature = =default_material_print_temperature
  29. material_print_temperature_layer_0 = =material_print_temperature + 5
  30. print_sequence = all_at_once
  31. retract_at_layer_change = True
  32. retraction_combing = noskin
  33. retraction_hop_enabled = True
  34. retraction_min_travel = =machine_nozzle_size * 3
  35. retraction_retract_speed = =retraction_speed
  36. roofing_layer_count = 1
  37. skin_line_width = =line_width * 1.2
  38. skin_outline_count = 2
  39. skirt_brim_minimal_length = 100
  40. skirt_brim_speed = =speed_layer_0
  41. skirt_gap = 5
  42. skirt_line_count = 1
  43. speed_layer_0 = 20
  44. speed_roofing = 20
  45. speed_topbottom = 25
  46. speed_travel = =speed_print if magic_spiralize else 120
  47. speed_travel_layer_0 = 60
  48. support_angle = 60
  49. support_bottom_enable = False
  50. support_bottom_height = 0
  51. support_connect_zigzags = False
  52. support_enable = False
  53. support_infill_rate = 20
  54. support_interface_density = 70
  55. support_interface_enable = True
  56. support_interface_height = 2
  57. support_interface_pattern = concentric
  58. support_interface_skip_height = 0.1
  59. support_type = everywhere
  60. support_use_towers = False
  61. support_xy_distance = 0.8
  62. support_xy_distance_overhang = =machine_nozzle_size / 2
  63. support_z_distance = 0.2
  64. travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
  65. travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
  66. travel_retract_before_outer_wall = True
  67. wall_0_wipe_dist = =round(line_width * 1.2,1)
  68. bridge_settings_enabled = True
  69. bridge_enable_more_layers = False
  70. bridge_skin_material_flow = 85
  71. bridge_skin_speed = 20
  72. bridge_wall_material_flow = 85
  73. bridge_wall_speed = 20
  74. infill_enable_travel_optimization = True
  75. retraction_combing_max_distance = 50