fabtotum_nylon_high.inst.cfg 1.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758
  1. [general]
  2. version = 4
  3. name = High Quality
  4. definition = fabtotum
  5. [metadata]
  6. setting_version = 17
  7. type = quality
  8. quality_type = high
  9. weight = 1
  10. material = generic_nylon
  11. variant = Lite 0.4 mm
  12. [values]
  13. adhesion_type = raft
  14. brim_width = 4
  15. cool_fan_enabled = False
  16. cool_fan_full_at_height = 0.45
  17. cool_fan_speed = 0
  18. cool_fan_speed_max = 0
  19. cool_fan_speed_min = 0
  20. cool_min_layer_time = 5
  21. cool_min_speed = 0
  22. infill_overlap = 15
  23. infill_sparse_density = 24
  24. layer_height = 0.10
  25. layer_height_0 = 0.10
  26. line_width = =machine_nozzle_size
  27. material_flow = 100
  28. raft_airgap = 0.22
  29. raft_base_line_width= =line_width * 2
  30. raft_base_thickness = =layer_height_0 * 2
  31. raft_interface_line_width = =line_width
  32. raft_interface_thickness = =layer_height
  33. raft_margin = 5
  34. raft_surface_layers = 2
  35. raft_surface_line_width = =line_width
  36. raft_surface_thickness = =layer_height
  37. retraction_hop = 0.5
  38. retraction_hop_enabled = False
  39. retraction_hop_only_when_collides = True
  40. skin_overlap = 10
  41. skirt_brim_minimal_length = 75
  42. skirt_gap = 1.5
  43. skirt_line_count = 5
  44. speed_infill = =speed_print
  45. speed_layer_0 = =math.ceil(speed_print * 25 / 30)
  46. speed_print = 30
  47. speed_topbottom = =math.ceil(speed_print * 40 / 30)
  48. speed_travel = 200
  49. speed_wall_0 = =math.ceil(speed_print * 40 / 30)
  50. speed_wall_x = =speed_print
  51. support_angle = 70
  52. support_type = buildplate
  53. support_z_distance = 0.15
  54. top_bottom_thickness = 0.8
  55. wall_thickness = 0.8
  56. z_seam_type = random