fdmextruder.def.json.po 8.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236
  1. # Cura
  2. # Copyright (C) 2021 Ultimaker B.V.
  3. # This file is distributed under the same license as the Cura package.
  4. #
  5. msgid ""
  6. msgstr ""
  7. "Project-Id-Version: Cura 4.11\n"
  8. "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
  9. "POT-Creation-Date: 2021-08-11 09:58+0000\n"
  10. "PO-Revision-Date: 2021-04-16 15:01+0200\n"
  11. "Last-Translator: Korean <info@bothof.nl>\n"
  12. "Language-Team: Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
  13. "Language: ko_KR\n"
  14. "MIME-Version: 1.0\n"
  15. "Content-Type: text/plain; charset=UTF-8\n"
  16. "Content-Transfer-Encoding: 8bit\n"
  17. "Plural-Forms: nplurals=1; plural=0;\n"
  18. "X-Generator: Poedit 2.4.1\n"
  19. #: fdmextruder.def.json
  20. msgctxt "machine_settings label"
  21. msgid "Machine"
  22. msgstr "기기"
  23. #: fdmextruder.def.json
  24. msgctxt "machine_settings description"
  25. msgid "Machine specific settings"
  26. msgstr "기기 세부 설정"
  27. #: fdmextruder.def.json
  28. msgctxt "extruder_nr label"
  29. msgid "Extruder"
  30. msgstr "익스트루더"
  31. #: fdmextruder.def.json
  32. msgctxt "extruder_nr description"
  33. msgid "The extruder train used for printing. This is used in multi-extrusion."
  34. msgstr "프린팅에 사용되는 익스트루더 트레인. 이것은 다중 압출에 사용됩니다."
  35. #: fdmextruder.def.json
  36. msgctxt "machine_nozzle_id label"
  37. msgid "Nozzle ID"
  38. msgstr "노즐 ID"
  39. #: fdmextruder.def.json
  40. msgctxt "machine_nozzle_id description"
  41. msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"."
  42. msgstr "\"AA 0.4\"및 \"BB 0.8\"과 같은 익스트루더 트레인의 노즐 ID."
  43. #: fdmextruder.def.json
  44. msgctxt "machine_nozzle_size label"
  45. msgid "Nozzle Diameter"
  46. msgstr "노즐 직경"
  47. #: fdmextruder.def.json
  48. msgctxt "machine_nozzle_size description"
  49. msgid "The inner diameter of the nozzle. Change this setting when using a non-standard nozzle size."
  50. msgstr "노즐의 내경. 비표준 노즐 크기를 사용할 때, 이 설정을 변경하십시오."
  51. #: fdmextruder.def.json
  52. msgctxt "machine_nozzle_offset_x label"
  53. msgid "Nozzle X Offset"
  54. msgstr "노즐 X 오프셋"
  55. #: fdmextruder.def.json
  56. msgctxt "machine_nozzle_offset_x description"
  57. msgid "The x-coordinate of the offset of the nozzle."
  58. msgstr "노즐 오프셋의 x 좌표."
  59. #: fdmextruder.def.json
  60. msgctxt "machine_nozzle_offset_y label"
  61. msgid "Nozzle Y Offset"
  62. msgstr "노즐 Y 오프셋"
  63. #: fdmextruder.def.json
  64. msgctxt "machine_nozzle_offset_y description"
  65. msgid "The y-coordinate of the offset of the nozzle."
  66. msgstr "노즐 오프셋의 y 좌표."
  67. #: fdmextruder.def.json
  68. msgctxt "machine_extruder_start_code label"
  69. msgid "Extruder Start G-Code"
  70. msgstr "익스트루더 스타트 G 코드"
  71. #: fdmextruder.def.json
  72. msgctxt "machine_extruder_start_code description"
  73. msgid "Start g-code to execute when switching to this extruder."
  74. msgstr "이 익스트루더로 전환 시 실행할 G 코드를 시작하십시오."
  75. #: fdmextruder.def.json
  76. msgctxt "machine_extruder_start_pos_abs label"
  77. msgid "Extruder Start Position Absolute"
  78. msgstr "익스트루더 시작 위치의 절대 값"
  79. #: fdmextruder.def.json
  80. msgctxt "machine_extruder_start_pos_abs description"
  81. msgid "Make the extruder starting position absolute rather than relative to the last-known location of the head."
  82. msgstr "익스트루더 시작 위치를 헤드의 마지막으로 알려진 위치에 상대적이 아닌 절대 위치로 만듭니다."
  83. #: fdmextruder.def.json
  84. msgctxt "machine_extruder_start_pos_x label"
  85. msgid "Extruder Start Position X"
  86. msgstr "익스트루더 시작 X의 위치"
  87. #: fdmextruder.def.json
  88. msgctxt "machine_extruder_start_pos_x description"
  89. msgid "The x-coordinate of the starting position when turning the extruder on."
  90. msgstr "익스트루더를 켤 때 시작 위치의 x 좌표."
  91. #: fdmextruder.def.json
  92. msgctxt "machine_extruder_start_pos_y label"
  93. msgid "Extruder Start Position Y"
  94. msgstr "익스트루더 시작 위치 Y"
  95. #: fdmextruder.def.json
  96. msgctxt "machine_extruder_start_pos_y description"
  97. msgid "The y-coordinate of the starting position when turning the extruder on."
  98. msgstr "익스트루더를 켤 때 시작 위치의 y 좌표."
  99. #: fdmextruder.def.json
  100. msgctxt "machine_extruder_end_code label"
  101. msgid "Extruder End G-Code"
  102. msgstr "익스트루더 엔드 G 코드"
  103. #: fdmextruder.def.json
  104. msgctxt "machine_extruder_end_code description"
  105. msgid "End g-code to execute when switching away from this extruder."
  106. msgstr "이 익스트루더에서 전환 시 실행할 G 코드를 종료하십시오."
  107. #: fdmextruder.def.json
  108. msgctxt "machine_extruder_end_pos_abs label"
  109. msgid "Extruder End Position Absolute"
  110. msgstr "익스트루더 끝 절대 위치"
  111. #: fdmextruder.def.json
  112. msgctxt "machine_extruder_end_pos_abs description"
  113. msgid "Make the extruder ending position absolute rather than relative to the last-known location of the head."
  114. msgstr "익스트루더가 헤드의 마지막으로 알려진 위치에 상대값이 아닌 절대 위치로 끝나도록 하십시오."
  115. #: fdmextruder.def.json
  116. msgctxt "machine_extruder_end_pos_x label"
  117. msgid "Extruder End Position X"
  118. msgstr "익스트루더 끝 X 위치"
  119. #: fdmextruder.def.json
  120. msgctxt "machine_extruder_end_pos_x description"
  121. msgid "The x-coordinate of the ending position when turning the extruder off."
  122. msgstr "익스트루더를 끌 때 끝 위치의 x 좌표."
  123. #: fdmextruder.def.json
  124. msgctxt "machine_extruder_end_pos_y label"
  125. msgid "Extruder End Position Y"
  126. msgstr "익스트루더 끝 Y 위치"
  127. #: fdmextruder.def.json
  128. msgctxt "machine_extruder_end_pos_y description"
  129. msgid "The y-coordinate of the ending position when turning the extruder off."
  130. msgstr "익스트루더를 끌 때 종료 위치의 y 좌표."
  131. #: fdmextruder.def.json
  132. msgctxt "extruder_prime_pos_z label"
  133. msgid "Extruder Prime Z Position"
  134. msgstr "익스트루더 프라임 Z 위치"
  135. #: fdmextruder.def.json
  136. msgctxt "extruder_prime_pos_z description"
  137. msgid "The Z coordinate of the position where the nozzle primes at the start of printing."
  138. msgstr "프린팅이 시작될 때 노즐이 시작하는 위치의 Z 좌표입니다."
  139. #: fdmextruder.def.json
  140. msgctxt "machine_extruder_cooling_fan_number label"
  141. msgid "Extruder Print Cooling Fan"
  142. msgstr "익스트루더 프린팅 냉각 팬"
  143. #: fdmextruder.def.json
  144. msgctxt "machine_extruder_cooling_fan_number description"
  145. msgid "The number of the print cooling fan associated with this extruder. Only change this from the default value of 0 when you have a different print cooling fan for each extruder."
  146. msgstr "이 익스트루더와 관련된 프린팅 냉각 팬의 개수. 각 익스트루더마다 다른 프린팅 냉각 팬이 있을 때만 기본값 0에서 변경하십시오."
  147. #: fdmextruder.def.json
  148. msgctxt "platform_adhesion label"
  149. msgid "Build Plate Adhesion"
  150. msgstr "빌드 플레이트 고정"
  151. #: fdmextruder.def.json
  152. msgctxt "platform_adhesion description"
  153. msgid "Adhesion"
  154. msgstr "고정"
  155. #: fdmextruder.def.json
  156. msgctxt "extruder_prime_pos_x label"
  157. msgid "Extruder Prime X Position"
  158. msgstr "익스트루더 프라임 X 위치"
  159. #: fdmextruder.def.json
  160. msgctxt "extruder_prime_pos_x description"
  161. msgid "The X coordinate of the position where the nozzle primes at the start of printing."
  162. msgstr "프린팅이 시작될 때 노즐이 시작하는 위치의 X 좌표."
  163. #: fdmextruder.def.json
  164. msgctxt "extruder_prime_pos_y label"
  165. msgid "Extruder Prime Y Position"
  166. msgstr "익스트루더 프라임 Y 위치"
  167. #: fdmextruder.def.json
  168. msgctxt "extruder_prime_pos_y description"
  169. msgid "The Y coordinate of the position where the nozzle primes at the start of printing."
  170. msgstr "프린팅이 시작될 때 노즐이 시작하는 위치의 Y 좌표."
  171. #: fdmextruder.def.json
  172. msgctxt "material label"
  173. msgid "Material"
  174. msgstr "재료"
  175. #: fdmextruder.def.json
  176. msgctxt "material description"
  177. msgid "Material"
  178. msgstr "재료"
  179. #: fdmextruder.def.json
  180. msgctxt "material_diameter label"
  181. msgid "Diameter"
  182. msgstr "직경"
  183. #: fdmextruder.def.json
  184. msgctxt "material_diameter description"
  185. msgid "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament."
  186. msgstr "사용 된 필라멘트의 직경을 조정합니다. 이 값을 사용 필라멘트의 직경과 일치시킵니다."
  187. #~ msgctxt "machine_extruder_start_code description"
  188. #~ msgid "Start g-code to execute whenever turning the extruder on."
  189. #~ msgstr "익스트루더를 켤 때마다 실행할 스타드 g 코드."
  190. #~ msgctxt "machine_extruder_end_code description"
  191. #~ msgid "End g-code to execute whenever turning the extruder off."
  192. #~ msgstr "익스트루더를 끌 때마다 실행할 엔드 g 코드."