two_trees_base.def.json 5.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126
  1. {
  2. "name": "Two Trees Base Printer",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": false,
  7. "author": "3DGadgets.my",
  8. "manufacturer": "Two Trees",
  9. "file_formats": "text/x-gcode",
  10. "first_start_actions": ["MachineSettingsAction"],
  11. "machine_extruder_trains": {
  12. "0": "two_trees_base_extruder_0"
  13. },
  14. "has_materials": true,
  15. "has_variants": true,
  16. "has_machine_quality": true,
  17. "variants_name": "Nozzle Size",
  18. "preferred_variant_name": "0.4mm Nozzle",
  19. "preferred_quality_type": "standard",
  20. "preferred_material": "generic_pla"
  21. },
  22. "overrides": {
  23. "machine_name": { "default_value": "Two Trees Base Printer" },
  24. "machine_start_gcode": { "default_value": "G28 ;Home\nM420 S1 ;Enable ABL using saved Mesh and Fade Height\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move bed down\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Bed up" },
  25. "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
  26. "machine_heated_bed": { "default_value": true },
  27. "material_diameter": { "default_value": 1.75 },
  28. "speed_print": { "value": 50.0 } ,
  29. "speed_infill": { "value": "speed_print" },
  30. "speed_wall": { "value": "speed_print / 2" },
  31. "speed_wall_0": { "value": "speed_wall" },
  32. "speed_wall_x": { "value": "speed_print / 1.5" },
  33. "speed_topbottom": { "value": "speed_print / 2" },
  34. "speed_roofing": { "value": "speed_topbottom" },
  35. "speed_layer_0": { "value": 20.0 },
  36. "speed_print_layer_0": { "value": "speed_layer_0" },
  37. "speed_prime_tower": { "value": "speed_topbottom" },
  38. "speed_support": { "value": "speed_wall_0" },
  39. "speed_support_interface": { "value": "speed_topbottom" },
  40. "speed_z_hop": { "value": 5 },
  41. "skirt_brim_speed": { "value": "speed_layer_0" },
  42. "line_width": { "value": "machine_nozzle_size" },
  43. "optimize_wall_printing_order": { "value": "True" },
  44. "z_seam_type": { "value": "'sharpest_corner'" },
  45. "z_seam_corner": { "value": "'z_seam_corner_inner'" },
  46. "infill_sparse_density": { "value": "20" },
  47. "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
  48. "infill_before_walls": { "value": false },
  49. "infill_overlap": { "value": 30.0 },
  50. "skin_overlap": { "value": 10.0 },
  51. "infill_wipe_dist": { "value": 0.0 },
  52. "wall_0_wipe_dist": { "value": 0.0 },
  53. "fill_perimeter_gaps": { "value": "'everywhere'" },
  54. "fill_outline_gaps": { "value": false },
  55. "filter_out_tiny_gaps": { "value": false },
  56. "retraction_hop_enabled": { "value": "False" },
  57. "retraction_hop": { "value": 0.2 },
  58. "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
  59. "retraction_combing_max_distance": { "value": 30 },
  60. "travel_avoid_other_parts": { "value": true },
  61. "travel_avoid_supports": { "value": true },
  62. "travel_retract_before_outer_wall": { "value": true },
  63. "retraction_enable": { "value": true },
  64. "retraction_speed": { "default_value" : 40 },
  65. "retraction_amount": { "default_value" : 7 },
  66. "retraction_count_max": { "value": 100 },
  67. "retraction_extrusion_window": { "value": 10 },
  68. "retraction_min_travel": { "value": 1.5 },
  69. "cool_fan_full_layer": { "value": "2" },
  70. "cool_fan_enabled": { "value": true },
  71. "cool_min_layer_time": { "value": 10 },
  72. "adhesion_type": { "value": "'skirt'" },
  73. "brim_replaces_support": { "value": false },
  74. "skirt_gap": { "value": 10.0 },
  75. "skirt_line_count": { "value": 3 },
  76. "adaptive_layer_height_variation": { "value": 0.04 },
  77. "adaptive_layer_height_variation_step": { "value": 0.04 },
  78. "meshfix_maximum_resolution": { "value": "0.25" },
  79. "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
  80. "support_angle": { "value": 50 },
  81. "support_pattern": { "value": "'zigzag'" },
  82. "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 25" },
  83. "support_use_towers": { "value": false },
  84. "support_xy_distance": { "value": "wall_line_width_0 * 2" },
  85. "support_xy_distance_overhang": { "value": "wall_line_width_0" },
  86. "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
  87. "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
  88. "support_wall_count": { "value": 0 },
  89. "support_brim_enable": { "value": true },
  90. "support_brim_width": { "value": 5 },
  91. "support_interface_enable": { "value": false },
  92. "support_interface_height": { "value": "layer_height * 4" },
  93. "support_interface_density": { "value": 33.333 },
  94. "support_interface_pattern": { "value": "'grid'" },
  95. "support_interface_skip_height": { "value": 0.2 },
  96. "minimum_support_area": { "value": 2 },
  97. "minimum_interface_area": { "value": 10 },
  98. "top_bottom_thickness": {"value": "layer_height_0 + layer_height * 3" },
  99. "wall_thickness": {"value": "line_width * 2" }
  100. }
  101. }