rigidbot.def.json 2.7 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071
  1. {
  2. "version": 2,
  3. "name": "RigidBot",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "RBC",
  8. "manufacturer": "RigidBot",
  9. "file_formats": "text/x-gcode",
  10. "platform": "rigidbot_platform.3mf",
  11. "machine_extruder_trains":
  12. {
  13. "0": "rigidbot_extruder_0"
  14. }
  15. },
  16. "overrides": {
  17. "machine_name": { "default_value": "RigidBot" },
  18. "machine_width": {
  19. "default_value": 254
  20. },
  21. "machine_depth": {
  22. "default_value": 254
  23. },
  24. "machine_height": {
  25. "default_value": 254
  26. },
  27. "machine_heated_bed": {
  28. "default_value": true
  29. },
  30. "gantry_height": {
  31. "value": "0"
  32. },
  33. "machine_gcode_flavor": {
  34. "default_value": "RepRap (Marlin/Sprinter)"
  35. },
  36. "machine_start_gcode": {
  37. "default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
  38. },
  39. "machine_end_gcode": {
  40. "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning"
  41. },
  42. "layer_height": {
  43. "default_value": 0.2
  44. },
  45. "wall_thickness": {
  46. "value": "0.8"
  47. },
  48. "top_bottom_thickness": {
  49. "default_value": 0.3
  50. },
  51. "speed_print": {
  52. "default_value": 60
  53. },
  54. "speed_layer_0": {
  55. "minimum_value": "0.1"
  56. },
  57. "cool_fan_enabled": {
  58. "default_value": false
  59. },
  60. "skirt_line_count": {
  61. "default_value": 3
  62. },
  63. "skirt_gap": {
  64. "default_value": 4
  65. },
  66. "skirt_brim_minimal_length": {
  67. "default_value": 200
  68. }
  69. }
  70. }