mendel90.def.json 3.1 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182
  1. {
  2. "name": "Mendel90",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Wilmer Gaona",
  9. "manufacturer": "Nophead",
  10. "file_formats": "text/x-gcode",
  11. "platform": "mendel90_platform.3mf",
  12. "platform_offset": [0, -23.6, 0],
  13. "machine_extruder_trains":
  14. {
  15. "0": "mendel90_extruder_0"
  16. }
  17. },
  18. "pages": [
  19. "BedLeveling"
  20. ],
  21. "overrides": {
  22. "machine_name": { "default_value": "Mendel90" },
  23. "machine_start_gcode": {
  24. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;absolute extrusion\nM107 ;start with the fan off\nG28 ;home\nG92 E0 ;zero the extruded length\nM140 S{material_bed_temperature_layer_0} ; set the bed temperature and continue on\nG1 X-50 Y98 F9000 ;go to the left of the top\nG1 Z0.05 ; close to the bed\nM104 S{material_print_temperature_layer_0}; pre-heat the extruder continue on\nM190 S{material_bed_temperature_layer_0} ;set the bed temp & wait\nM109 S{material_print_temperature_layer_0};set the extruder temp for layer 0 & wait\nG92 E0 ;zero the extruded length\nG1 X50 E10 F300 ; make a thick line to prime extruder\nG92 E0 ; reset extruder\nG1 E-4 F1800\nG1 Z0.3 ;lift Z\n"
  25. },
  26. "machine_end_gcode": {
  27. "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nM107 ;carriage fan off\nG91 ;relative positioning\nG1 Z10 ;Move up Z 10mm\nG90 ;back to absolute mode\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG92 E0 ;zero the extruded length\nG1 Z200 X-100 F9000 ; go to top\nG1 Y100 F5000 ;Move Y to back\nM42 P42 S255 ;Turn on Bed cooling fan on\nG4 S10 ;Wait 10 seconds\nM42 P42 S0 ;Turn off bed cooling fan\nM84 ;steppers off\n"
  28. },
  29. "material_bed_temp_wait": {
  30. "default_value": true
  31. },
  32. "material_print_temp_prepend": {
  33. "default_value": true
  34. },
  35. "machine_width": {
  36. "default_value": 200
  37. },
  38. "machine_height": {
  39. "default_value": 200
  40. },
  41. "machine_depth": {
  42. "default_value": 200
  43. },
  44. "machine_heated_bed": {
  45. "default_value": true
  46. },
  47. "machine_center_is_zero": {
  48. "default_value": true
  49. },
  50. "machine_extruder_count": {
  51. "default_value": 1
  52. },
  53. "machine_nozzle_tip_outer_diameter": {
  54. "default_value": 1
  55. },
  56. "machine_nozzle_head_distance": {
  57. "default_value": 5
  58. },
  59. "machine_heat_zone_length": {
  60. "default_value": 16
  61. },
  62. "machine_gcode_flavor": {
  63. "default_value": "RepRap (Marlin/Sprinter)"
  64. },
  65. "gantry_height": {
  66. "value": "55"
  67. },
  68. "machine_head_with_fans_polygon":
  69. {
  70. "default_value": [
  71. [ -12, 9 ],
  72. [ -12, -9 ],
  73. [ 14, 9 ],
  74. [ 14, -9 ]
  75. ]
  76. }
  77. }
  78. }