koonovo_kn5.def.json 6.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142
  1. {
  2. "name": "Koonovo KN5 Idex",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Koonovo",
  8. "manufacturer": "Koonovo",
  9. "file_formats": "text/x-gcode",
  10. "platform": "koonovo_kn5.stl",
  11. "quality_definition": "koonovo_base",
  12. "first_start_actions": ["MachineSettingsAction"],
  13. "machine_extruder_trains": {
  14. "0": "koonovo_kn5_extruder_0",
  15. "1": "koonovo_kn5_extruder_1"
  16. },
  17. "has_materials": true,
  18. "has_machine_quality": true,
  19. "preferred_quality_type": "standard",
  20. "preferred_material": "generic_pla"
  21. },
  22. "overrides": {
  23. "machine_name": { "default_value": "Koonovo KN5" },
  24. "machine_width": { "default_value": 420 },
  25. "machine_depth": { "default_value": 420 },
  26. "machine_height": { "default_value": 400 },
  27. "machine_head_with_fans_polygon": { "default_value": [
  28. [-26, 34],
  29. [-26, -32],
  30. [32, -32],
  31. [32, 34]
  32. ]
  33. },
  34. "gantry_height": { "value": 0 },
  35. "machine_extruder_count": { "default_value": 2 },
  36. "machine_start_gcode": {
  37. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Move to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nM117 Printing..."
  38. },
  39. "machine_end_gcode": {
  40. "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
  41. },
  42. "machine_max_feedrate_x": { "value": 200 },
  43. "machine_max_feedrate_y": { "value": 200 },
  44. "machine_max_feedrate_z": { "value": 50 },
  45. "machine_max_feedrate_e": { "value": 100 },
  46. "machine_max_acceleration_x": { "value": 500 },
  47. "machine_max_acceleration_y": { "value": 500 },
  48. "machine_max_acceleration_z": { "value": 50 },
  49. "machine_max_acceleration_e": { "value": 2000 },
  50. "machine_acceleration": { "value": 500 },
  51. "machine_heated_bed": { "default_value": true },
  52. "material_diameter": { "default_value": 1.75 },
  53. "acceleration_print": { "value": 500 },
  54. "acceleration_travel": { "value": 500 },
  55. "line_width": { "value": "machine_nozzle_size" },
  56. "wall_thickness": {"value": "line_width * 2" },
  57. "top_bottom_thickness": {"value": "layer_height_0 + layer_height * 3" },
  58. "infill_sparse_density": { "value": "15" },
  59. "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
  60. "material_print_temperature": { "value": "195" },
  61. "material_print_temperature_layer_0": { "value": "material_print_temperature" },
  62. "material_initial_print_temperature": { "value": "material_print_temperature" },
  63. "material_final_print_temperature": { "value": "material_print_temperature" },
  64. "material_standby_temperature": { "value": "material_print_temperature" },
  65. "material_bed_temperature": { "value": "45" },
  66. "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
  67. "material_flow": { "value": 100 },
  68. "speed_print": { "value": 50.0 } ,
  69. "speed_infill": { "value": "speed_print" },
  70. "speed_wall": { "value": "speed_print / 2" },
  71. "speed_wall_0": { "value": "speed_wall" },
  72. "speed_wall_x": { "value": "speed_wall" },
  73. "speed_topbottom": { "value": "speed_print / 2" },
  74. "speed_travel": { "value": "120.0 if speed_print < 60 else 180.0 if speed_print > 100 else speed_print * 2.2" },
  75. "speed_layer_0": { "value": 25.0 },
  76. "speed_print_layer_0": { "value": "speed_layer_0" },
  77. "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 25 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
  78. "speed_prime_tower": { "value": "speed_topbottom" },
  79. "speed_support": { "value": "speed_wall_0" },
  80. "speed_z_hop": { "value": 5 },
  81. "retraction_enable": { "value": true },
  82. "retraction_amount": { "value": 2.5 },
  83. "retraction_speed": { "value": 40 },
  84. "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
  85. "cool_fan_enabled": { "value": true },
  86. "cool_min_layer_time": { "value": 10 },
  87. "support_brim_enable": { "value": true },
  88. "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
  89. "support_pattern": { "value": "'zigzag'" },
  90. "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
  91. "support_use_towers": { "value": false },
  92. "support_xy_distance": { "value": "wall_line_width_0 * 2" },
  93. "support_xy_distance_overhang": { "value": "wall_line_width_0" },
  94. "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
  95. "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
  96. "support_wall_count": { "value": 1 },
  97. "support_brim_width": { "value": 4 },
  98. "support_enable": { "value": true },
  99. "support_interface_enable": { "value": true },
  100. "support_interface_height": { "value": "layer_height * 4" },
  101. "support_interface_density": { "value": 33.333 },
  102. "support_interface_pattern": { "value": "'grid'" },
  103. "support_interface_skip_height": { "value": 0.2 },
  104. "minimum_support_area": { "value": 2 },
  105. "minimum_interface_area": { "value": 10 },
  106. "fill_perimeter_gaps": { "value": "'everywhere'" },
  107. "fill_outline_gaps": { "value": false },
  108. "filter_out_tiny_gaps": { "value": false },
  109. "adhesion_type": { "value": "'skirt'" },
  110. "brim_replaces_support": { "value": false },
  111. "skirt_gap": { "value": 6.0 },
  112. "skirt_line_count": { "value": 3 }
  113. }
  114. }