bq_witbox.def.json 2.6 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465
  1. {
  2. "version": 2,
  3. "name": "BQ Witbox",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "BQ",
  8. "manufacturer": "BQ",
  9. "file_formats": "text/x-gcode",
  10. "platform": "bq_witbox_platform.3mf",
  11. "platform_offset": [ 0, -145, -38],
  12. "machine_extruder_trains":
  13. {
  14. "0": "bq_witbox_extruder_0"
  15. },
  16. "firmware_file": "MarlinWitbox.hex"
  17. },
  18. "overrides": {
  19. "machine_name": { "default_value": "BQ Witbox" },
  20. "machine_start_gcode": {
  21. "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --"
  22. },
  23. "machine_end_gcode": {
  24. "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG90 ;set to absolute positioning\nG1 Z200 ;move the platform to the bottom\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --"
  25. },
  26. "machine_width": {
  27. "default_value": 297
  28. },
  29. "machine_depth": {
  30. "default_value": 210
  31. },
  32. "machine_height": {
  33. "default_value": 200
  34. },
  35. "machine_heated_bed": {
  36. "default_value": false
  37. },
  38. "machine_center_is_zero": {
  39. "default_value": false
  40. },
  41. "machine_gcode_flavor": {
  42. "default_value": "RepRap (Marlin/Sprinter)"
  43. },
  44. "layer_height": {
  45. "default_value": 0.2
  46. },
  47. "layer_height_0": {
  48. "default_value": 0.2
  49. },
  50. "wall_thickness": {
  51. "value": "1"
  52. },
  53. "top_bottom_thickness": {
  54. "default_value": 1
  55. },
  56. "speed_print": {
  57. "default_value": 40
  58. },
  59. "support_enable": {
  60. "default_value": true
  61. }
  62. }
  63. }