Cura/resources/definitions/blv_mgn_cube_base.def.json

{
  "name": "BLV MGN Cube Base",
  "version": 2,
  "inherits": "anet3d",
  "metadata": {
    "visible": false,
    "author": "wolfgangmauer",
    "manufacturer": "BLV",
    "file_formats": "text/x-gcode",
    "first_start_actions": [
      "MachineSettingsAction"
    ],
    "preferred_quality_type": "normal",
    "machine_extruder_trains": {
      "0": "blv_mgn_cube_extruder_0"
    },
    "preferred_material": "generic_pla",
    "has_variants": false,
    "has_materials": true,
    "preferred_variant_name": "0.4mm Nozzle",
    "has_machine_quality": false
  },
  "overrides": {
    "machine_name": {
      "default_value": "BLV mgn Cube"
    },
    "initial_layer_line_width_factor": {
      "default_value": 130.0
    },
    "speed_slowdown_layers": {
      "default_value": 1
    },
    "optimize_wall_printing_order": {
      "value": true
    },
    "infill_enable_travel_optimization": {
      "default_value": true
    },
    "machine_heated_bed": {
      "default_value": true
    },
    "machine_center_is_zero": {
      "default_value": false
    },
    "machine_gcode_flavor": {
      "default_value": "RepRap (RepRap)"
    },
    "fill_perimeter_gaps": {
      "value": "'everywhere'"
    },
    "fill_outline_gaps": {
      "value": true
    },
    "retraction_speed": {
      "default_value": 85,
      "maximum_value_warning": 130
    },
    "retraction_amount": {
      "default_value": 5.5
    },
    "retraction_hop_enabled": {
      "value": true
    },
    "retraction_hop": {
      "value": 0.4
    },
    "retraction_combing": {
      "value": "'infill'"
    },
    "retraction_combing_max_distance": {
      "value": 10
    },
    "machine_start_gcode": {
      "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG92 E0 ;zero the extruded length\nM104 S170 T0; start preheat hotend_0\nM140 S{material_bed_temperature_layer_0} ; start preheating the bed\nM190 S{material_bed_temperature_layer_0} ; heat to Cura Bed setting\nG28\nG12 P1 S2 T3\nG34\nG29\nG1 X0 Y0 Z1 F9000\nM109 S{material_print_temperature_layer_0} T0\nG1 X100 Y0 Z{layer_height_0} E30 F500 ;intro line\nG92 E0 ;zero the extruded length again\nM117 Printing...\n"
    },
    "machine_end_gcode": {
      "default_value": "G91 ;relative positioning\nG1 Z5 F500; move nozzle relative to position\nG90 ;absolute positioning\nG1 X0 Y{machine_depth}\nG12 P1 T3\nM104 S0\nM140 S0\nG92 E0\nM84\nM109 S50\nM81\n"
    },
    "top_bottom_pattern": {
      "value": "'zigzag'"
    },
    "speed_layer_0": {
      "value": "math.ceil(speed_print * 0.25)"
    },
    "adhesion_type": {
      "value": "'none'"
    },
    "speed_travel": {
      "value": 120,
      "maximum_value_warning": 251,
      "maximum_value": 300
    },
    "infill_pattern": {
      "value": "'tetrahedral'"
    },
    "bridge_settings_enabled": {
      "default_value": true
    },
    "layer_height_0": {
      "resolve": "max(0.2, min(extruderValues('layer_height')))"
    },
    "line_width": {
      "value": "machine_nozzle_size"
    },
    "wall_line_width": {
      "value": "machine_nozzle_size"
    },
    "infill_before_walls": {
      "value": true
    },
    "zig_zaggify_infill": {
      "value": true
    },
    "acceleration_enabled": {
      "value": false
    },
    "jerk_enabled": {
      "value": false
    },
    "bridge_wall_coast": {
      "default_value": 10
    },
    "bridge_fan_speed": {
      "default_value": 100
    },
    "bridge_fan_speed_2": {
      "resolve": "max(cool_fan_speed, 50)"
    },
    "bridge_fan_speed_3": {
      "resolve": "max(cool_fan_speed, 20)"
    },
    "cool_min_layer_time_fan_speed_max": {
      "default_value": 20
    },
    "cool_min_layer_time": {
      "value": 15
    },
    "cool_fan_speed_min": {
      "value": "cool_fan_speed"
    },
    "cool_fan_full_at_height": {
      "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)"
    },
    "cool_fan_full_layer": {
      "value": 4
    },
    "wall_line_count": {
      "value": 3
    },
    "bottom_layers": {
      "value": 3
    },
    "top_layers": {
      "value": 3
    },
    "travel_retract_before_outer_wall": {
      "value": false
    },
    "z_seam_type": {
      "value": "'shortest'"
    },
    "brim_width": {
      "default_value": 5
    },
    "infill_randomize_start_location": {
      "default_value": true
    },
    "skin_overlap": {
      "value": 10.0
    },
    "speed_infill": {
      "value": "speed_print"
    },
    "speed_travel_layer_0": {
      "value": "math.ceil(speed_travel * 0.4)"
    },
    "speed_print": {
      "value": 100,
      "maximum_value_warning": 151,
      "maximum_value": 250
    },
    "retraction_count_max": {
      "value": 20
    },
    "speed_wall": {
      "value": "math.ceil(speed_print * 0.33)"
    },
    "speed_wall_0": {
      "value": "math.ceil(speed_print * 0.33)"
    },
    "speed_wall_x": {
      "value": "math.ceil(speed_print * 0.66)"
    },
    "speed_topbottom": {
      "value": "math.ceil(speed_print * 0.33)"
    },
    "speed_roofing": {
      "value": "math.ceil(speed_print * 0.33)"
    },
    "retraction_retract_speed": {
      "maximum_value_warning": 130
    },
    "retraction_prime_speed": {
      "value": "math.ceil(retraction_speed * 0.4)",
      "maximum_value_warning": 130
    },
    "retraction_extrusion_window": {
      "value": "retraction_amount"
    },
    "infill_overlap": {
      "value": "10 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0",
      "maximum_value_warning": 100,
      "minimum_value_warning": -50
    }
  }
}