SV02.def.json 4.7 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586
  1. {
  2. "version": 2,
  3. "name": "Sovol-SV02",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Sovol",
  8. "manufacturer": "Sovol 3D",
  9. "file_formats": "text/x-gcode",
  10. "has_variants": false,
  11. "has_machine_quality": false,
  12. "preferred_quality_type": "draft",
  13. "machine_extruder_trains": {
  14. "0": "SV02_extruder_0",
  15. "1": "SV02_extruder_1"
  16. }
  17. },
  18. "overrides": {
  19. "machine_name": { "default_value": "SV02" },
  20. "machine_extruder_count": { "default_value": 2 },
  21. "machine_heated_bed": { "default_value": true },
  22. "machine_width": { "default_value": 300 },
  23. "machine_depth": { "default_value": 250 },
  24. "machine_height": { "default_value": 300 },
  25. "machine_center_is_zero": { "default_value": false },
  26. "retraction_amount": { "default_value": 5},
  27. "retraction_speed": { "default_value": 50},
  28. "gantry_height": { "value": "30" },
  29. "speed_print": { "default_value": 50 },
  30. "material_print_temperature": { "value": 195 },
  31. "material_print_temperature_layer_0": { "value": "material_print_temperature" },
  32. "material_initial_print_temperature": { "value": "material_print_temperature" },
  33. "material_final_print_temperature": { "value": 195 },
  34. "machine_max_feedrate_x": { "value": 500 },
  35. "machine_max_feedrate_y": { "value": 500 },
  36. "machine_max_feedrate_z": { "value": 10 },
  37. "machine_max_feedrate_e": { "value": 50 },
  38. "machine_max_acceleration_x": { "value": 500 },
  39. "machine_max_acceleration_y": { "value": 500 },
  40. "machine_max_acceleration_z": { "value": 100 },
  41. "machine_max_acceleration_e": { "value": 500 },
  42. "machine_acceleration": { "value": 500 },
  43. "machine_max_jerk_xy": { "value": 8 },
  44. "machine_max_jerk_z": { "value": 0.4 },
  45. "machine_max_jerk_e": { "value": 5 },
  46. "machine_heated_bed": { "default_value": true },
  47. "material_diameter": { "default_value": 1.75 },
  48. "infill_overlap": { "default_value": 15 },
  49. "acceleration_print": { "value": 500 },
  50. "acceleration_travel": { "value": 500 },
  51. "acceleration_travel_layer_0": { "value": "acceleration_travel" },
  52. "jerk_print": { "value": 8 },
  53. "jerk_travel": { "value": "jerk_print" },
  54. "jerk_travel_layer_0": { "value": "jerk_travel" },
  55. "acceleration_enabled": { "value": false },
  56. "jerk_enabled": { "value": false },
  57. "machine_max_jerk_xy": { "default_value": 5.0 },
  58. "machine_max_jerk_z": { "default_value": 0.4 },
  59. "machine_max_jerk_e": { "default_value": 5.0 },
  60. "prime_tower_position_x": { "value": "240" },
  61. "prime_tower_position_y": { "value": "190" },
  62. "prime_tower_size": { "value": "30" },
  63. "prime_tower_wipe_enabled": { "default_value": true },
  64. "prime_tower_min_volume": { "value": "((resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height'))/2"},
  65. "travel_retract_before_outer_wall": { "default_value": true },
  66. "infill_sparse_density": { "value": "15" },
  67. "infill_pattern": { "value": "'lines'" },
  68. "infill_before_walls": { "value": false },
  69. "infill_overlap": { "value": 30.0 },
  70. "skin_overlap": { "value": 10.0 },
  71. "infill_wipe_dist": { "value": 0.0 },
  72. "wall_0_wipe_dist": { "value": 0.0 },
  73. "adhesion_type": { "value": "'skirt'" },
  74. "brim_replaces_support": { "value": false },
  75. "skirt_gap": { "value": 2 },
  76. "skirt_line_count": { "value": 3 },
  77. "adhesion_extruder_nr": { "value": 1 },
  78. "brim_width": { "value": 4 },
  79. "coasting_enable": { "default_value": true },
  80. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  81. "machine_start_gcode": { "default_value": "G21 ;metric values\nG28 ;home all\nG90 ;absolute positioning\nM107 ;start with the fan off\nG1 F2400 Z15.0 ;raise the nozzle 15mm\nM109 S{material_print_temperature} ;Set Extruder Temperature and Wait\nM190 S{material_bed_temperature}; Wait for bed temperature to reach target temp\nT0 ;Switch to Extruder 1\nG1 F3000 X5 Y10 Z0.2 ;move to prime start position\nG92 E0 ;reset extrusion distance\nG1 F600 X160 E5 ;prime nozzle in a line\nG1 F5000 X180 ;quick wipe\nG92 E0 ;reset extrusion distance" },
  82. "machine_end_gcode": { "default_value": "M104 S0 ;hotend off\nM140 S0 ;bed off\nG92 E0\nG1 F2000 E-100 ;retract filament 100mm\nG92 E0\nG1 F3000 X0 Y240 ;move bed for easy part removal\nM84 ;disable steppers" },
  83. "top_bottom_thickness": { "default_value": 1 }
  84. }
  85. }