um3_aa0.25_TPLA_Normal_Quality.inst.cfg 1.1 KB

123456789101112131415161718192021222324252627282930313233343536373839
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 6
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_tough_pla
  11. variant = AA 0.25
  12. [values]
  13. brim_width = 8
  14. cool_fan_full_at_height = =layer_height_0
  15. cool_min_speed = 7
  16. infill_line_width = =line_width
  17. infill_overlap = 10
  18. infill_pattern = grid
  19. line_width = =machine_nozzle_size * 0.92
  20. machine_nozzle_cool_down_speed = 0.9
  21. machine_nozzle_heat_up_speed = 1.4
  22. material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
  23. material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
  24. material_print_temperature = =default_material_print_temperature - 15
  25. skin_overlap = 5
  26. speed_layer_0 = =math.ceil(speed_print * 30 / 30)
  27. speed_print = 30
  28. speed_topbottom = =math.ceil(speed_print * 20 / 30)
  29. speed_travel_layer_0 = 120
  30. speed_wall = =math.ceil(speed_print * 25 / 30)
  31. speed_wall_0 = =math.ceil(speed_print * 20 / 30)
  32. top_bottom_thickness = 0.72
  33. wall_0_inset = 0.015
  34. wall_0_wipe_dist = 0.25
  35. wall_line_width = =line_width
  36. wall_line_width_x= =line_width
  37. wall_thickness = 0.7