gmax15plus_dual.def.json 3.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354
  1. {
  2. "id": "gmax15plus_dual",
  3. "version": 2,
  4. "name": "gMax 1.5 Plus Dual Extruder",
  5. "inherits": "fdmprinter",
  6. "metadata": {
  7. "visible": true,
  8. "author": "GTL_180109",
  9. "manufacturer": "gCreate",
  10. "category": "Other",
  11. "file_formats": "text/x-gcode",
  12. "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl",
  13. "has_variants": true,
  14. "has_machine_quality": true,
  15. "variants_name": "Hotend",
  16. "preferred_variant_name": "0.5mm E3D (Default)",
  17. "machine_extruder_trains": {
  18. "0": "gmax15plus_dual_extruder_0",
  19. "1": "gmax15plus_dual_extruder_1"
  20. }
  21. },
  22. "overrides": {
  23. "machine_name": { "default_value": "gMax 1.5 Plus Dual Extruder" },
  24. "machine_extruder_count": { "default_value": 2 },
  25. "machine_heated_bed": { "default_value": false },
  26. "machine_width": { "default_value": 406 },
  27. "machine_depth": { "default_value": 406 },
  28. "machine_height": { "default_value": 533 },
  29. "machine_center_is_zero": { "default_value": false },
  30. "layer_height": { "default_value": 0.2 },
  31. "layer_height_0": { "default_value": 0.3 },
  32. "retraction_amount": { "default_value": 1 },
  33. "retraction_speed": { "default_value": 70},
  34. "adhesion_type": { "default_value": "skirt" },
  35. "gantry_height": { "default_value": 50 },
  36. "speed_print": { "default_value": 50 },
  37. "speed_travel": { "default_value": 70 },
  38. "machine_max_acceleration_x": { "default_value": 600 },
  39. "machine_max_acceleration_y": { "default_value": 600 },
  40. "machine_max_acceleration_z": { "default_value": 30 },
  41. "machine_max_acceleration_e": { "default_value": 10000 },
  42. "machine_max_jerk_xy": { "default_value": 8 },
  43. "machine_max_jerk_z": { "default_value": 0.4 },
  44. "machine_max_jerk_e": { "default_value": 5.0 },
  45. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  46. "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 ;Home X/Y/Z\nG29 ; Bed level\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
  47. "machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
  48. "material_print_temperature": { "default_value": 202 },
  49. "wall_thickness": { "default_value": 1 },
  50. "top_bottom_thickness": { "default_value": 1 },
  51. "bottom_thickness": { "default_value": 1 }
  52. }
  53. }