Cura/resources/definitions/bibo2_dual.def.json

{
	"id": "BIBO2 dual",
	"version": 2,
	"name": "BIBO2 dual",
	"inherits": "fdmprinter",
	"metadata": {
		"visible": true,
		"author": "na",
		"manufacturer": "BIBO",
		"category": "Other",
		"file_formats": "text/x-gcode",
		"has_materials": true,
		"machine_extruder_trains": {
			"0": "bibo2_dual_extruder_0",
			"1": "bibo2_dual_extruder_1"
		},
		"first_start_actions": [
			"MachineSettingsAction"
		]
	},
	"overrides": {
		"machine_name": {
			"default_value": "BIBO2 dual"
		},
		"machine_width": {
			"default_value": 214
		},
		"machine_height": {
			"default_value": 160
		},
		"machine_depth": {
			"default_value": 186
		},
		"machine_center_is_zero": {
			"default_value": true
		},
		"machine_heated_bed": {
			"default_value": true
		},
		"machine_nozzle_heat_up_speed": {
			"default_value": 2
		},
		"machine_nozzle_cool_down_speed": {
			"default_value": 2
		},
		"machine_head_with_fans_polygon": {
			"default_value": [
				[
					-68.18,
					64.63
				],
				[
					-68.18,
					-47.38
				],
				[
					35.18,
					64.63
				],
				[
					35.18,
					-47.38
				]
			]
		},
		"gantry_height": {
			"default_value": 12
		},
		"machine_use_extruder_offset_to_offset_coords": {
			"default_value": true
		},
		"machine_gcode_flavor": {
			"default_value": "RepRap (Marlin/Sprinter)"
		},
		"machine_start_gcode": {
			"default_value": "G21        ;metric values\nG90        ;absolute positioning\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 Z2.0 F400 ;move the platform down 15mm\nT0\nG92 E0\nG28\nG1 Y0 F1200 E0\nG92 E0\nM117 BIBO Printing..."
		},
		"machine_end_gcode": {
			"default_value": ";End GCode\nM104 T0 S0                     ;extruder heater off\nM104 T1 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91\nG1 Z1 F100                                        ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-2 X-20 Y-20 F300 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning"
		},
		"machine_extruder_count": {
			"default_value": 2
		},
		"prime_tower_position_x": {
			"default_value": 50
		},
		"prime_tower_position_y": {
			"default_value": 50
		}
	}
}