Cura/resources/definitions/ultimaker_methodx.def.json

{
    "version": 2,
    "name": "UltiMaker Method X",
    "inherits": "ultimaker_method_base",
    "metadata":
    {
        "visible": true,
        "author": "UltiMaker",
        "manufacturer": "Ultimaker B.V.",
        "file_formats": "application/x-makerbot",
        "platform": "ultimaker_method_platform.stl",
        "exclude_materials": [
            "dsm_",
            "Essentium_",
            "imade3d_",
            "chromatik_",
            "3D-Fuel_",
            "bestfilament_",
            "emotiontech_",
            "eryone_",
            "eSUN_",
            "Extrudr_",
            "fabtotum_",
            "fdplast_",
            "filo3d_",
            "generic_",
            "goofoo_",
            "ideagen3D_",
            "imade3d_",
            "innofill_",
            "layer_one_",
            "leapfrog_",
            "polyflex_pla",
            "polymax_pla",
            "polyplus_pla",
            "polywood_pla",
            "redd_",
            "tizyx_",
            "ultimaker_tough_pla_175",
            "verbatim_",
            "Vertex_",
            "volumic_",
            "xyzprinting_",
            "zyyx_pro_",
            "octofiber_",
            "fiberlogy_"
        ],
        "has_machine_materials": true,
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "ultimaker_methodx_extruder_left",
            "1": "ultimaker_methodx_extruder_right"
        },
        "platform_offset": [
            0,
            0,
            16
        ],
        "preferred_material": "ultimaker_absr_175",
        "preferred_quality_type": "draft",
        "preferred_variant_name": "1XA",
        "reference_machine_id": "lava_f",
        "supports_network_connection": true,
        "supports_usb_connection": false,
        "variant_definition": "ultimaker_methodx",
        "variants_name": "Extruder",
        "weight": -1
    },
    "overrides":
    {
        "build_volume_temperature": { "maximum_value": "107" },
        "machine_depth": { "default_value": 236.48 },
        "machine_disallowed_areas":
        {
            "default_value": [
                [
                    [-141.65, -118.11],
                    [141.65, -118.11],
                    [141.65, -94],
                    [-141.65, -94]
                ],
                [
                    [-141.65, 118.37],
                    [141.65, 118.37],
                    [141.65, 94],
                    [-141.65, 94]
                ],
                [
                    [-141.65, -118.11],
                    [-75, -118.11],
                    [-75, 118.37],
                    [-141.65, 118.37]
                ],
                [
                    [75, -118.11],
                    [141.65, -118.11],
                    [141.65, 118.37],
                    [75, 118.37]
                ]
            ]
        },
        "machine_height": { "default_value": 196 },
        "machine_name": { "default_value": "UltiMaker Method X" },
        "machine_width": { "default_value": 283.3 },
        "prime_tower_position_x": { "value": "(150 / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (150 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (150 / 2 if resolveOrValue('machine_center_is_zero') else 0)" },
        "prime_tower_position_y": { "value": "190 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (190 / 2 if resolveOrValue('machine_center_is_zero') else 0)" }
    }
}