Cura/resources/definitions/printrbot_simple.def.json

{
    "id": "printrbot_simple",
    "version": 2, 
    "name": "Printrbot Simple",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Calvindog717",
        "manufacturer": "PrintrBot",
        "file_formats": "text/x-gcode"
    },

    "overrides": {
        "machine_heated_bed": { "default_value": false },
        "machine_width": { "default_value": 150 },
        "machine_height": { "default_value": 150 },
        "machine_depth": { "default_value": 140 },
        "machine_center_is_zero": { "default_value": false },
        "machine_nozzle_size": { "default_value": 0.3 },
        "material_diameter": { "default_value": 1.75 },
        "machine_nozzle_heat_up_speed": { "default_value": 2 },
        "machine_nozzle_cool_down_speed": { "default_value": 2 },
        "machine_head_with_fans_polygon": {
            "default_value": [
                [ 55, -20 ],
                [ 55, 99999 ],
                [ -49, 99999 ],
                [ -49, -20 ]
            ]
        },
        "gantry_height": { "default_value": 99999 },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },

        "machine_start_gcode": {
            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29 ; auto bed-levelling\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
        },
        "machine_end_gcode": {
            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
        }
    }
}