| 12345678910111213141516171819202122232425262728293031323334353637383940 |
- {
- "name": "Kupido",
- "version": 2,
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Ultimaker",
- "manufacturer": "Kupido",
- "file_formats": "text/x-gcode",
- "platform_offset": [ 0, 0, 0],
- "machine_extruder_trains":
- {
- "0": "kupido_extruder_0"
- }
- },
- "overrides": {
- "machine_name": { "default_value": "Kupido" },
- "machine_start_gcode": {
- "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n ;M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X Y to endstops\n G28 Z0 ;move Z to endstops\n G1 Z20.0 F40 ;move the platform down 20mm\n G1 Y0 X170 F{speed_travel}\n G92 E0 ;zero the extruded length\n G1 F200 E10 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G4 P7000\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
- },
- "machine_end_gcode": {
- "default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
- },
- "prime_tower_size": { "default_value": 8.660254037844387 },
- "retraction_speed": { "default_value": 60 },
- "material_bed_temperature": { "default_value": 60 },
- "speed_wall_x": { "default_value": 40 },
- "skirt_line_count": { "default_value": 2 },
- "retraction_min_travel": { "default_value": 2 },
- "speed_wall_0": { "default_value": 30 },
- "material_print_temperature": { "default_value": 220 },
- "brim_line_count": { "default_value": 15 },
- "retraction_amount": { "default_value": 3.6 },
- "speed_topbottom": { "default_value": 20 },
- "layer_height": { "default_value": 0.2 },
- "speed_print": { "default_value": 30 },
- "speed_infill": { "default_value": 30 }
- }
- }
|
