| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061 |
- {
- "version": 2,
- "name": "Deltacomb 3D",
- "inherits": "fdmprinter",
- "metadata": {
- "author": "Gabriele Rossetti",
- "visible": true,
- "manufacturer": "Deltacomb 3D",
- "category": "Other",
- "file_formats": "text/x-gcode",
- "platform": "deltacomb.stl",
- "has_machine_quality": true,
- "machine_extruder_trains":
- {
- "0": "deltacomb_extruder_0"
- }
- },
- "overrides": {
- "machine_heated_bed": { "default_value": true },
- "machine_width": { "default_value": 190 },
- "machine_height": { "default_value": 250 },
- "machine_depth": { "default_value": 190 },
- "machine_center_is_zero": { "default_value": true },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home all axes (max endstops)\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."},
- "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 ;Home all axes (max endstops)\nM84 ;steppers off\nG90 ;absolute positioning" },
- "machine_shape": { "default_value": "elliptic" },
- "retraction_hop_enabled": { "default_value": true },
- "retraction_amount" : { "default_value": 3.5 },
- "retraction_speed" : { "default_value": 50 },
- "material_final_print_temperature": { "value": "material_print_temperature - 5" },
- "material_initial_print_temperature": { "value": "material_print_temperature" },
- "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
- "material_diameter": { "default_value": 1.75 },
- "travel_avoid_distance": { "default_value": 1, "value": "1" },
- "speed_print" : { "default_value": 70 },
- "speed_travel": { "value": "150.0" },
- "speed_infill": { "value": "round(speed_print * 1.05, 0)" },
- "speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
- "speed_wall": { "value": "speed_print" },
- "speed_wall_0": { "value": "20" },
- "speed_wall_x": { "value": "speed_wall" },
- "speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
- "speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
- "skirt_brim_speed": { "value": "speed_layer_0" },
- "skirt_line_count": { "default_value": 3 },
- "skirt_brim_minimal_length": { "default_value": 150 },
- "infill_sparse_density": { "default_value": 90 },
- "gradual_infill_steps": { "default_value": 2 },
- "infill_before_walls" : { "default_value": false },
- "top_bottom_thickness": { "default_value": 0.6 },
- "support_z_distance": { "value": "layer_height * 2" },
- "support_bottom_distance": { "value": "layer_height" },
- "support_use_towers" : { "default_value": false },
- "jerk_wall_0" : { "value": "30" },
- "jerk_travel" : { "default_value": 20 },
- "acceleration_travel" : { "value": 10000 },
- "machine_max_feedrate_z" : { "default_value": 150 }
- }
- }
|
