Cura/resources/definitions/cubicon_common.def.json

{
    "version": 2,
    "name": "Cubicon Common",
    "inherits": "fdmprinter",
    "metadata": {
        "author": "Cubicon R&D Center",
        "manufacturer": "Cubicon",
        "visible": false
    },
    "overrides": {
        "machine_start_gcode": {
            "default_value": "M201 X400 Y400\nM202 X400 Y400\nG28 ; Home\nG1 Z15.0 F6000 ;move the platform down 15mm\n;Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0"
        },
        "machine_end_gcode": {
            "default_value": "M104 S0\nM140 S0\nM904\nM117 Print completed! \nM84"
        },
        "machine_gcode_flavor": {
            "default_value": "Repetier"
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "travel_compensate_overlapping_walls_enabled": {
            "default_value": false
        },
        "travel_compensate_overlapping_walls_0_enabled": {
            "default_value": false
        },
        "travel_compensate_overlapping_walls_x_enabled": {
            "default_value": false
        },
        "layer_height": {
            "default_value": 0.2
        },
        "layer_height_0": {
            "default_value": 0.2
        },
        "infill_line_width": {
            "default_value": 0.6
        },
        "adhesion_type": {
            "default_value": "raft"
        },
        "roofing_pattern": { "default_value": "lines" },
        "top_bottom_pattern": { "default_value": "lines" },
        "top_bottom_pattern_0": {
            "default_value": "zigzag"
        },
        "fill_perimeter_gaps": { "default_value": "everywhere" },
        "infill_pattern": {
            "default_value": "zigzag"
        },
        "infill_sparse_density": { "default_value": 20 },
        "infill_overlap": {
            "default_value": 15
        },
        "infill_before_walls": { "default_value": false },
        "infill_sparse_thickness": { "default_value": 0.2 },
        "top_bottom_thickness": {
            "default_value": 1.0
        },
        "top_thickness": {
            "default_value": 1.0
        },
        "bottom_thickness": {
            "default_value": 0.6,
            "value": "top_bottom_thickness * 0.6"
        },
        "roofing_layer_count": {
            "default_value": 1
        },
        "skin_preshrink": { "default_value": true },
        "material_flow_layer_0": { "default_value": 100 },
        "top_skin_preshrink": { "default_value": 1.2 },
        "bottom_skin_preshrink": { "default_value": 1.2 },
        "max_skin_angle_for_expansion": { "default_value": 90 },
        "min_skin_width_for_expansion": { "default_value": 2.7475 },
        "skin_angles": { "default_value": "[135,45]" },
        "roofing_angles": { "default_value": "[135,45]" },
        "coasting_volume": { "default_value": 0.032 },
        "wall_thickness": { "default_value": 1.2 },
        "wall_line_count": { "default_value": 3 },
        "speed_wall_0": { "default_value": 25 },
        "skin_overlap": { "default_value": 5 },
        "cool_min_layer_time_fan_speed_max": { "default_value": 15 },
        "cool_min_layer_time": { "default_value": 15 },
        "support_roof_pattern": { "default_value": "zigzag" },
        "support_bottom_pattern": { "default_value": "zigzag" },
        "support_interface_pattern": { "default_value": "zigzag" },
        "support_pattern": { "default_value": "zigzag" },
        "retraction_amount": { "default_value": 1.5 },
        "top_layers": {
            "default_value": 5
        },
        "bottom_layers": {
            "default_value": 3
        }
    }
}