um_s3_aa0.4_pp_0.1mm.inst.cfg 1.3 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546
  1. [general]
  2. definition = ultimaker_s3
  3. name = Fine
  4. version = 4
  5. [metadata]
  6. material = generic_pp
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. variant = AA 0.4
  11. weight = 0
  12. [values]
  13. brim_width = 20
  14. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
  15. infill_wipe_dist = 0.1
  16. machine_min_cool_heat_time_window = 15
  17. machine_nozzle_cool_down_speed = 0.85
  18. machine_nozzle_heat_up_speed = 1.5
  19. material_final_print_temperature = =material_print_temperature - 10
  20. material_initial_print_temperature = =material_print_temperature - 10
  21. material_print_temperature = =default_material_print_temperature - 2
  22. multiple_mesh_overlap = 0
  23. prime_tower_enable = False
  24. prime_tower_size = 16
  25. prime_tower_wipe_enabled = True
  26. retraction_count_max = 15
  27. retraction_extra_prime_amount = 0.8
  28. retraction_hop = 2
  29. retraction_hop_only_when_collides = True
  30. speed_print = 25
  31. speed_topbottom = =math.ceil(speed_print * 25 / 25)
  32. speed_wall = =math.ceil(speed_print * 25 / 25)
  33. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  34. support_angle = 50
  35. support_bottom_distance = =support_z_distance
  36. support_interface_enable = True
  37. support_top_distance = =support_z_distance
  38. support_z_distance = =math.ceil(0.3/layer_height)*layer_height
  39. switch_extruder_prime_speed = 15
  40. switch_extruder_retraction_amount = 20
  41. switch_extruder_retraction_speeds = 35
  42. top_bottom_thickness = 1
  43. wall_0_inset = 0