Cura/resources/machines/uniqbot_one.json

{
    "id": "uniqbot_one",
    "version": 1, 
    "name": "Uniqbot",
    "manufacturer": "Unimatech",
    "author": "Unimatech",
    "icon": "icon_ultimaker2.png",
    "file_formats": "text/x-gcode",
    "inherits": "fdmprinter.json",

    "overrides": {
        "machine_heated_bed": { "default": false },
        "machine_width": { "default": 140 },
        "machine_height": { "default": 120 },
        "machine_depth": { "default": 160 },
        "machine_center_is_zero": { "default": false },
        "machine_nozzle_size": { "default": 0.5 },
        "material_diameter": { "default": 1.75 },
        "machine_nozzle_heat_up_speed": { "default": 2.0 },
        "machine_nozzle_cool_down_speed": { "default": 2.0 },
        "machine_nozzle_gantry_distance": { "default": 55 },
        "machine_gcode_flavor": { "default": "RepRap (Marlin/Sprinter)" },

        "machine_start_gcode": {
            "default": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
        },
        "machine_end_gcode": {
            "default": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
        }
    }
}