um3_aa0.25_PLA_Normal_Quality.inst.cfg 836 B

123456789101112131415161718192021222324252627282930313233343536
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 4
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_pla
  11. variant = AA 0.25
  12. [values]
  13. brim_width = 8
  14. cool_fan_full_at_height = =layer_height_0
  15. cool_min_speed = 10
  16. infill_overlap = 10
  17. infill_pattern = grid
  18. machine_nozzle_cool_down_speed = 0.9
  19. machine_nozzle_heat_up_speed = 1.4
  20. material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
  21. material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
  22. material_print_temperature = 190
  23. retraction_hop = 0.2
  24. skin_overlap = 5
  25. speed_layer_0 = 30
  26. speed_print = 30
  27. speed_travel_layer_0 = 120
  28. speed_wall = 25
  29. speed_wall_0 = 20
  30. top_bottom_thickness = 0.72
  31. travel_avoid_distance = 0.4
  32. wall_0_inset = 0.015
  33. wall_0_wipe_dist = 0.25
  34. wall_thickness = 0.7