Cura/resources/definitions/imade3d_jellybox.def.json

{
    "version": 2,
    "name": "IMADE3D JellyBOX",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "IMADE3D",
        "manufacturer": "IMADE3D",
        "platform": "imade3d_jellybox_platform.stl",
        "platform_offset": [ 0, -0.3, 0],
        "file_formats": "text/x-gcode",
        "preferred_variant_name": "0.4 mm",
        "preferred_quality_type": "fast",
        "has_materials": true,
        "has_variants": true,
        "has_machine_materials": true,
        "has_machine_quality": true
      },

    "overrides": {
        "machine_head_with_fans_polygon": { "default_value": [[ 0, 0 ],[ 0, 0 ],[ 0, 0 ],[ 0, 0 ]]},
        "machine_name": { "default_value": "IMADE3D JellyBOX" },
        "machine_width": { "default_value": 170 },
        "machine_height": { "default_value": 145 },
        "machine_depth": { "default_value": 160 },
        "machine_nozzle_size": { "default_value": 0.4 },
        "material_diameter": { "default_value": 1.75 },
        "machine_heated_bed": { "default_value": true },
        "machine_center_is_zero": { "default_value": false },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_start_gcode": {
            "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n;              Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n;             sliced for :  {machine_name}\n;        nozzle diameter :  {machine_nozzle_size}\n;      filament diameter :  {material_diameter}\n;           layer height :  {layer_height}\n;       1st layer height :  {layer_height_0}\n;             line width :  {line_width}\n;  outer wall wipe dist. :  {wall_0_wipe_dist}\n;      infill line width :  {infill_line_width}\n;         wall thickness :  {wall_thickness}\n;          top thickness :  {top_thickness}\n;       bottom thickness :  {bottom_thickness}\n;         infill density :  {infill_sparse_density}\n;         infill pattern :  {infill_pattern}\n;      print temperature :  {material_print_temperature}\n;  1st layer print temp. :  {material_print_temperature_layer_0}\n; heated bed temperature :  {material_bed_temperature}\n;    1st layer bed temp. :  {material_bed_temperature_layer_0}\n;      regular fan speed :  {cool_fan_speed_min}\n;          max fan speed :  {cool_fan_speed_max}\n;     retraction amount  :  {retraction_amount}\n;   retr. retract speed  :  {retraction_retract_speed}\n;     retr. prime speed  :  {retraction_prime_speed}\n;   build plate adhesion :  {adhesion_type}\n;                support ?  {support_enable}\n;             spiralized ?  {magic_spiralize}\n\nM117 Preparing        ;write Preparing\nM140 S{material_bed_temperature_layer_0}              ;set bed temperature and move on\nM109 S{material_print_temperature}             ; wait for the extruder to reach desired temperature\nM206 X10.0 Y0.0       ;set x homing offset for default bed leveling\nG21                   ;metric values\nG90                   ;absolute positioning\nM107                  ;start with the fan off\nM82                   ;set extruder to absolute mode\nG28                   ;home all axes\nM203 Z4               ;slow Z speed down for greater accuracy when probing\nG29                   ;auto bed leveling procedure\nM203 Z7               ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0}              ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0}             ;wait for the extruder to reach desired temperature\nG92 E0                ;reset the extruder position\nG1 F1500 E15          ;extrude 15mm of feed stock\nG92 E0                ;reset the extruder position again\nM117 Print starting   ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n"
        },
        "machine_end_gcode": {
            "default_value": "\n;---------------------------------\n;;; Jellybox End Script Begin ;;;\n;_________________________________\nM117 Finishing Up ;write Finishing Up\n\nM104 S0 ;extruder heater off\nM140 S0 ;bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG28 X ;home x, so the head is out of the way\nG1 Y100 ;move Y forward, so the print is more accessible\nM84 ;steppers off\n\nM117 Print finished ;write Print finished\n;---------------------------------------\n;;; Jellybox End Script End ;;;\n;_______________________________________"
        }
    }
}