um_s5_aa0.4_pc_0.2mm.inst.cfg 1.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142
  1. [general]
  2. definition = ultimaker_s5
  3. name = Fast
  4. version = 4
  5. [metadata]
  6. material = generic_pc
  7. quality_type = draft
  8. setting_version = 22
  9. type = quality
  10. variant = AA 0.4
  11. weight = -2
  12. [values]
  13. brim_width = 20
  14. infill_overlap = 0
  15. infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
  16. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  17. infill_wipe_dist = 0.1
  18. machine_min_cool_heat_time_window = 15
  19. machine_nozzle_cool_down_speed = 0.85
  20. machine_nozzle_heat_up_speed = 1.5
  21. material_print_temperature = =default_material_print_temperature + 10
  22. multiple_mesh_overlap = 0
  23. ooze_shield_angle = 40
  24. prime_tower_enable = True
  25. prime_tower_wipe_enabled = True
  26. raft_airgap = 0.25
  27. retraction_hop = 2
  28. retraction_hop_only_when_collides = True
  29. retraction_min_travel = 0.8
  30. skin_overlap = 30
  31. speed_print = 50
  32. speed_topbottom = =math.ceil(speed_print * 25 / 50)
  33. speed_wall = =math.ceil(speed_print * 40 / 50)
  34. speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
  35. support_interface_density = 87.5
  36. switch_extruder_prime_speed = 15
  37. switch_extruder_retraction_amount = 20
  38. switch_extruder_retraction_speeds = 35
  39. wall_0_inset = 0