Cura/resources/quality/ultimaker_s5/um_s5_aa0.25_pla_0.1mm.inst.cfg

[general]
definition = ultimaker_s5
name = Fine
version = 4

[metadata]
material = generic_pla
quality_type = normal
setting_version = 22
type = quality
variant = AA 0.25
weight = 0

[values]
brim_width = 8
infill_overlap = =0 if infill_sparse_density > 80 else 10
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_heat_up_speed = 1.4
material_print_temperature = 190
retraction_hop = 0.2
skin_overlap = 5
speed_print = 30
speed_wall = =math.ceil(speed_print * 25 / 30)
speed_wall_0 = =math.ceil(speed_print * 20 / 30)
top_bottom_thickness = 0.72
travel_avoid_distance = 0.4
wall_0_inset = 0.015
wall_0_wipe_dist = 0.25