um_s5_aa0.8_um-pla_0.3mm.inst.cfg 2.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475
  1. [general]
  2. definition = ultimaker_s5
  3. name = Extra Fast
  4. version = 4
  5. [metadata]
  6. material = ultimaker_pla
  7. quality_type = verydraft
  8. setting_version = 22
  9. type = quality
  10. variant = AA 0.8
  11. weight = -3
  12. [values]
  13. _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
  14. _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
  15. _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
  16. acceleration_infill = =acceleration_print
  17. acceleration_ironing = 1000
  18. acceleration_layer_0 = =acceleration_wall_0
  19. acceleration_print = 3500
  20. acceleration_roofing = =acceleration_wall_0
  21. acceleration_topbottom = =acceleration_wall
  22. acceleration_wall = =acceleration_infill
  23. acceleration_wall_0 = 1500
  24. acceleration_wall_x = =acceleration_wall
  25. bridge_skin_speed = =bridge_wall_speed
  26. bridge_sparse_infill_max_density = 50
  27. bridge_wall_speed = 30
  28. cool_min_layer_time = 6
  29. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
  30. infill_sparse_density = 15
  31. jerk_infill = =jerk_print
  32. jerk_layer_0 = =jerk_wall_0
  33. jerk_print = =max(30, speed_print/2)
  34. jerk_roofing = =jerk_wall_0
  35. jerk_topbottom = =jerk_wall
  36. jerk_wall = =jerk_infill
  37. jerk_wall_0 = =max(30, speed_wall_0/2)
  38. machine_nozzle_cool_down_speed = 1.3
  39. machine_nozzle_heat_up_speed = 1.9
  40. material_extrusion_cool_down_speed = 0.7
  41. material_flow = 93
  42. material_max_flowrate = 15
  43. material_print_temperature = =default_material_print_temperature + 10
  44. optimize_wall_printing_order = False
  45. prime_tower_enable = True
  46. raft_airgap = 0.25
  47. retraction_amount = 4
  48. retraction_prime_speed = 22
  49. retraction_speed = 45
  50. small_skin_on_surface = False
  51. small_skin_width = 4
  52. speed_infill = =speed_print
  53. speed_ironing = 20
  54. speed_layer_0 = 30
  55. speed_prime_tower = =speed_wall_0
  56. speed_print = 65
  57. speed_roofing = =math.ceil(speed_wall*(45/100))
  58. speed_support_interface = =speed_wall_0
  59. speed_topbottom = =speed_print
  60. speed_wall = =speed_infill
  61. speed_wall_0 = =math.ceil(speed_wall*(30/65))
  62. speed_wall_x = =speed_wall
  63. speed_wall_x_roofing = =speed_roofing
  64. support_angle = 70
  65. support_interface_enable = False
  66. support_structure = tree
  67. top_bottom_thickness = =max(1 , layer_height * 5)
  68. wall_0_wipe_dist = 0.8
  69. wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
  70. z_seam_relative = True
  71. z_seam_type = back
  72. zig_zaggify_infill = True