| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455 |
- [general]
- version = 4
- name = Fast
- definition = ultimaker_s5
- [metadata]
- setting_version = 5
- type = quality
- quality_type = draft
- weight = -2
- material = generic_pp
- variant = AA 0.8
- buildplate = Aluminum
- [values]
- brim_width = 25
- cool_min_layer_time_fan_speed_max = 6
- cool_min_speed = 17
- top_skin_expand_distance = =line_width * 2
- infill_before_walls = True
- infill_line_width = =round(line_width * 0.7 / 0.8, 2)
- infill_pattern = tetrahedral
- jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
- jerk_support = =math.ceil(jerk_print * 25 / 25)
- jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
- material_bed_temperature_layer_0 = =material_bed_temperature
- material_print_temperature = =default_material_print_temperature - 2
- material_print_temperature_layer_0 = =default_material_print_temperature + 2
- material_standby_temperature = 100
- multiple_mesh_overlap = 0.2
- prime_tower_enable = True
- prime_tower_flow = 100
- prime_tower_wall_thickness = =prime_tower_line_width * 2
- retract_at_layer_change = False
- retraction_count_max = 12
- retraction_extra_prime_amount = 0.5
- retraction_hop = 0.5
- retraction_min_travel = 1.5
- retraction_prime_speed = 15
- skin_line_width = =round(line_width * 0.78 / 0.8, 2)
- speed_wall_x = =math.ceil(speed_wall * 30 / 30)
- support_bottom_distance = =support_z_distance
- support_line_width = =round(line_width * 0.7 / 0.8, 2)
- support_offset = =line_width
- switch_extruder_prime_speed = 15
- switch_extruder_retraction_amount = 20
- switch_extruder_retraction_speeds = 45
- top_bottom_thickness = 1.6
- travel_compensate_overlapping_walls_0_enabled = False
- wall_0_wipe_dist = =line_width * 2
- wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
- wall_thickness = 1.6
- default_material_bed_temperature = 95
|
