Cura/resources/quality/ultimaker_s5/um_s5_aa0.4_aluminum_ABS_Fast_Print.inst.cfg

[general]
version = 4
name = Normal
definition = ultimaker_s5

[metadata]
setting_version = 5
type = quality
quality_type = fast
weight = -1
material = generic_abs
variant = AA 0.4
buildplate = Aluminum

[values]
cool_min_speed = 7
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_print_temperature = =default_material_print_temperature + 15
material_initial_print_temperature = =material_print_temperature - 15
material_final_print_temperature = =material_print_temperature - 20
prime_tower_enable = False
speed_print = 60
speed_layer_0 = 20
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

infill_line_width = =round(line_width * 0.4 / 0.35, 2)
speed_infill = =math.ceil(speed_print * 45 / 60)

material_bed_temperature_layer_0 = 100
default_material_bed_temperature = 90
prime_blob_enable = False
layer_height_0 = 0.17