ultimaker_s5_aa0.25.inst.cfg 1.4 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950
  1. [general]
  2. name = AA 0.25
  3. version = 4
  4. definition = ultimaker_s5
  5. [metadata]
  6. setting_version = 4
  7. type = variant
  8. hardware_type = nozzle
  9. [values]
  10. brim_width = 7
  11. infill_line_width = 0.23
  12. layer_height_0 = 0.17
  13. line_width = 0.23
  14. machine_nozzle_cool_down_speed = 0.85
  15. machine_nozzle_heat_up_speed = 1.5
  16. machine_nozzle_id = AA 0.25
  17. machine_nozzle_size = 0.25
  18. machine_nozzle_tip_outer_diameter = 0.65
  19. material_final_print_temperature = =material_print_temperature - 10
  20. material_initial_print_temperature = =material_print_temperature - 5
  21. raft_airgap = 0.3
  22. raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
  23. raft_interface_line_spacing = =raft_interface_line_width + 0.2
  24. raft_interface_line_width = =line_width * 2
  25. raft_interface_thickness = =layer_height * 1.5
  26. raft_jerk = =jerk_print
  27. raft_margin = 15
  28. raft_surface_layers = 2
  29. retraction_count_max = 25
  30. retraction_extrusion_window = 1
  31. retraction_min_travel = 0.7
  32. retraction_prime_speed = =retraction_speed
  33. skin_overlap = 15
  34. speed_layer_0 = 20
  35. speed_print = 55
  36. speed_topbottom = 20
  37. speed_wall = =math.ceil(speed_print * 30 / 55)
  38. support_angle = 60
  39. support_bottom_distance = =support_z_distance / 2
  40. support_pattern = zigzag
  41. support_top_distance = =support_z_distance
  42. support_use_towers = True
  43. support_z_distance = =layer_height * 2
  44. switch_extruder_prime_speed = =switch_extruder_retraction_speeds
  45. switch_extruder_retraction_amount = =machine_heat_zone_length
  46. top_bottom_thickness = 1.2
  47. wall_line_width_x = 0.23
  48. wall_thickness = 1.3