ultimaker3_extended_aa04.inst.cfg 1.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142
  1. [general]
  2. name = AA 0.4
  3. version = 4
  4. definition = ultimaker3_extended
  5. [metadata]
  6. setting_version = 4
  7. type = variant
  8. hardware_type = nozzle
  9. [values]
  10. brim_width = 7
  11. machine_nozzle_cool_down_speed = 0.9
  12. machine_nozzle_id = AA 0.4
  13. machine_nozzle_tip_outer_diameter = 1.0
  14. raft_acceleration = =acceleration_print
  15. raft_airgap = 0.3
  16. raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
  17. raft_interface_line_spacing = =raft_interface_line_width + 0.2
  18. raft_interface_line_width = =line_width * 2
  19. raft_interface_thickness = =layer_height * 1.5
  20. raft_jerk = =jerk_print
  21. raft_margin = 15
  22. raft_surface_layers = 2
  23. retraction_amount = 6.5
  24. retraction_count_max = 25
  25. retraction_min_travel = =line_width * 2
  26. retraction_prime_speed = =retraction_speed
  27. skin_overlap = 15
  28. speed_print = 70
  29. speed_topbottom = =math.ceil(speed_print * 30 / 70)
  30. speed_wall = =math.ceil(speed_print * 30 / 70)
  31. support_angle = 60
  32. support_bottom_distance = =support_z_distance / 2
  33. support_pattern = zigzag
  34. support_top_distance = =support_z_distance
  35. support_use_towers = True
  36. support_z_distance = =layer_height * 2
  37. switch_extruder_prime_speed = =switch_extruder_retraction_speeds
  38. switch_extruder_retraction_amount = =machine_heat_zone_length
  39. top_bottom_thickness = 1.2
  40. wall_thickness = 1.3