Cura/resources/variants/ultimaker2_plus_0.6.inst.cfg

[general]
name = 0.6 mm
version = 4
definition = ultimaker2_plus

[metadata]
setting_version = 4
type = variant
hardware_type = nozzle

[values]
machine_nozzle_size = 0.6
machine_nozzle_tip_outer_diameter = 1.25
coasting_volume = 1.36
speed_wall = =round(speed_print * 4 / 3, 1)
speed_wall_0 = =1 if speed_wall < 10 else (speed_wall - 10)
speed_topbottom = =round(speed_print / 2, 1)