| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566 |
- [general]
- version = 4
- name = Normal
- definition = ultimaker3
- [metadata]
- setting_version = 4
- type = quality
- quality_type = fast
- weight = -1
- material = generic_tpu
- variant = AA 0.4
- [values]
- acceleration_enabled = True
- acceleration_print = 4000
- brim_width = 8.75
- cool_fan_speed_max = 100
- cool_min_layer_time_fan_speed_max = 6
- cool_min_speed = 4
- gradual_infill_step_height = =5 * layer_height
- infill_line_width = =round(line_width * 0.38 / 0.38, 2)
- infill_overlap = 0
- infill_pattern = cross_3d
- infill_sparse_density = 10
- infill_wipe_dist = 0.1
- jerk_enabled = True
- jerk_print = 25
- layer_height = 0.15
- line_width = =machine_nozzle_size * 0.95
- machine_min_cool_heat_time_window = 15
- machine_nozzle_cool_down_speed = 0.5
- machine_nozzle_heat_up_speed = 2.5
- material_final_print_temperature = =material_print_temperature - 21
- material_flow = 106
- material_initial_print_temperature = =material_print_temperature - 16
- material_print_temperature = =default_material_print_temperature + 2
- material_print_temperature_layer_0 = =default_material_print_temperature + 2
- material_standby_temperature = 100
- multiple_mesh_overlap = 0
- prime_tower_wipe_enabled = True
- retraction_amount = 7
- retraction_count_max = 12
- retraction_extra_prime_amount = 0.8
- retraction_extrusion_window = 1
- retraction_hop = 1.5
- retraction_hop_only_when_collides = True
- retraction_min_travel = =line_width * 2
- retraction_prime_speed = 15
- skin_overlap = 5
- speed_equalize_flow_enabled = True
- speed_layer_0 = 18
- speed_print = 25
- speed_topbottom = =math.ceil(speed_print * 25 / 25)
- speed_travel = 300
- speed_wall = =math.ceil(speed_print * 25 / 25)
- speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
- support_angle = 50
- switch_extruder_prime_speed = 15
- switch_extruder_retraction_amount = 20
- switch_extruder_retraction_speeds = 35
- top_bottom_thickness = 0.7
- travel_avoid_distance = 1.5
- wall_0_inset = 0
- wall_line_width_x = =line_width
- wall_thickness = 0.76
|
