gmax15plus_pla_dual_very_thick.inst.cfg 1.5 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970
  1. [general]
  2. version = 4
  3. name = gMax 1.5+ Dual Very Thick Layers
  4. definition = gmax15plus_dual
  5. [metadata]
  6. setting_version = 4
  7. type = quality
  8. quality_type = extra_course
  9. weight = -3
  10. [values]
  11. layer_height = 0.32
  12. infill_before_walls = False
  13. infill_overlap = 20
  14. infill_pattern = grid
  15. speed_slowdown_layers = 1
  16. acceleration_enabled = True
  17. acceleration_print = 400
  18. acceleration_travel = 700
  19. coasting_enable = False
  20. coasting_volume = 0.0625
  21. retraction_combing = off
  22. retraction_amount = 0.75
  23. retraction_speed = 70
  24. material_flow = 98
  25. material_diameter = 1.75
  26. support_use_towers = False
  27. support_z_distance = 0.2
  28. support_xy_distance = 1.5
  29. support_join_distance = 10
  30. support_interface_enable = True
  31. support_interface_pattern = lines
  32. adhesion_type = skirt
  33. skirt_gap = 2
  34. cool_fan_speed = 70
  35. cool_fan_speed_max = 85
  36. skin_overlap = 10
  37. speed_print = 40
  38. speed_infill = =math.ceil(speed_print * 0.85)
  39. speed_layer_0 = =math.ceil(speed_print * 0.45)
  40. speed_topbottom = =math.ceil(speed_print * 0.75)
  41. speed_wall = =math.ceil(speed_print * 0.5)
  42. speed_wall_x = =math.ceil(speed_print * 0.7)
  43. top_bottom_pattern = lines
  44. top_layers = 3
  45. top_thickness = 1
  46. bottom_layers = 2
  47. wall_line_count = 2
  48. z_seam_corner = z_seam_corner_none
  49. ooze_shield_angle = 20
  50. ooze_shield_dist = 4
  51. ooze_shield_enabled = True
  52. prime_tower_enable = False
  53. prime_tower_position_x = 350
  54. prime_tower_position_y = 350
  55. prime_tower_wall_thickness = 2
  56. switch_extruder_retraction_amount = 6
  57. switch_extruder_retraction_speeds = 60
  58. material_standby_temperature = =material_print_temperature - 10