rigid3d.def.json 2.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051
  1. {
  2. "name": "Rigid3D",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Ultimaker",
  8. "manufacturer": "Rigid3D",
  9. "file_formats": "text/x-gcode",
  10. "platform_offset": [ 0, 0, 0]
  11. },
  12. "overrides": {
  13. "machine_start_gcode": {
  14. "default_value": " ; -- START GCODE --\n G21\n G28 ; Home extruder\n G29 ; Autolevel bed\n M107 ; Turn off fan\n G90 ; Absolute positioning\n M82 ; Extruder in absolute mode\n G92 E0 ; Reset extruder position\n ; -- end of START GCODE --\n\n"
  15. },
  16. "machine_end_gcode": {
  17. "default_value": " ; -- END GCODE --\n G1 X0 Y230 ; Get extruder out of way.\n M107 ; Turn off fan\n G91 ; Relative positioning\n G0 Z20 ; Lift extruder up\n T0\n G1 E-1 ; Reduce filament pressure\n M104 T0 S0 ; Turn ectruder heater off\n G90 ; Absolute positioning\n G92 E0 ; Reset extruder position\n M140 S0 ; Disable heated bed\n M84 ; Turn steppers off\n ; -- end of END GCODE --\n"
  18. },
  19. "machine_head_polygon": { "default_value": [[ 22, 67], [ 22, 51], [ 36, 51], [ 36, 67]] },
  20. "skirt_gap": { "default_value": 5.0 },
  21. "cool_min_layer_time": { "default_value": 10 },
  22. "prime_tower_size": { "default_value": 7.745966692414834 },
  23. "speed_wall_x": { "default_value": 40 },
  24. "speed_travel": { "default_value": 100 },
  25. "bottom_thickness": { "default_value": 0.75 },
  26. "material_diameter": { "default_value": 1.75 },
  27. "layer_height_0": { "default_value": 0.25 },
  28. "support_angle": { "default_value": 45 },
  29. "material_bed_temperature": { "default_value": 100 },
  30. "top_thickness": { "default_value": 0.75 },
  31. "material_print_temperature": { "default_value": 235 },
  32. "retraction_speed": { "default_value": 60.0 },
  33. "wall_thickness": { "default_value": 0.8 },
  34. "retraction_min_travel": { "default_value": 2 },
  35. "speed_wall_0": { "default_value": 30 },
  36. "retraction_amount": { "default_value": 1 },
  37. "speed_topbottom": { "default_value": 30 },
  38. "layer_height": { "default_value": 0.25 },
  39. "speed_print": { "default_value": 40 },
  40. "speed_infill": { "default_value": 40 },
  41. "machine_extruder_count": { "default_value": 1 },
  42. "machine_heated_bed": { "default_value": true },
  43. "machine_center_is_zero": { "default_value": false },
  44. "machine_height": { "default_value": 210 },
  45. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  46. "machine_depth": { "default_value": 250 },
  47. "machine_width": { "default_value": 250 },
  48. "machine_name": { "default_value": "Rigid3D" }
  49. }
  50. }