malyan_m200.def.json 4.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990
  1. {
  2. "id": "malyan_m200",
  3. "version": 2,
  4. "name": "Malyan M200",
  5. "inherits": "fdmprinter",
  6. "metadata": {
  7. "author": "Brian Corbino, Tyler Gibson",
  8. "manufacturer": "Malyan",
  9. "category": "Other",
  10. "file_formats": "text/x-gcode",
  11. "platform": "malyan_m200_platform.stl",
  12. "has_machine_quality": true,
  13. "has_materials": true,
  14. "preferred_quality_type": "normal",
  15. "supports_usb_connection": true,
  16. "visible": true,
  17. "first_start_actions": ["MachineSettingsAction"],
  18. "supported_actions": ["MachineSettingsAction"]
  19. },
  20. "overrides": {
  21. "machine_name": { "default_value": "Malyan M200" },
  22. "speed_print": { "default_value": 50 },
  23. "speed_wall_0": { "value": "round(speed_print * 0.75, 2)" },
  24. "speed_wall_x": { "value": "speed_print" },
  25. "speed_support": { "value": "speed_wall_0" },
  26. "speed_layer_0": { "value": "round(speed_print / 2.0, 2)" },
  27. "speed_travel": { "default_value": 50 },
  28. "speed_travel_layer_0": { "default_value": 40 },
  29. "speed_infill": { "value": "speed_print" },
  30. "speed_topbottom": {"value": "speed_print / 2"},
  31. "layer_height":
  32. {
  33. "minimum_value_warning": "0.04375",
  34. "maximum_value_warning": "machine_nozzle_size * 0.48125 + 0.0875",
  35. "default_value": 0.13125
  36. },
  37. "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
  38. "material_print_temperature": { "minimum_value": "0" },
  39. "material_print_temperature_layer_0": { "value": "min(material_print_temperature + 5, 245)" },
  40. "material_bed_temperature": { "minimum_value": "0" },
  41. "material_bed_temperature_layer_0": { "value": "min(material_bed_temperature + 5, 70)" },
  42. "material_standby_temperature": { "minimum_value": "0" },
  43. "machine_show_variants": { "default_value": true },
  44. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  45. "machine_start_gcode" : {
  46. "default_value": "G21;(metric values)\nG90;(absolute positioning)\nM82;(set extruder to absolute mode)\nM107;(start with the fan off)\nG28;(Home the printer)\nG92 E0;(Reset the extruder to 0)\nG0 Z5 E5 F500;(Move up and prime the nozzle)\nG0 X-1 Z0;(Move outside the printable area)\nG1 Y60 E8 F500;(Draw a priming/wiping line to the rear)\nG1 X-1;(Move a little closer to the print area)\nG1 Y10 E16 F500;(draw more priming/wiping)\nG1 E15 F250;(Small retract)\nG92 E0;(Zero the extruder)"
  47. },
  48. "machine_end_gcode" : {
  49. "default_value": "G0 X0 Y127;(Stick out the part)\nM190 S0;(Turn off heat bed, don't wait.)\nG92 E10;(Set extruder to 10)\nG1 E7 F200;(retract 3mm)\nM104 S0;(Turn off nozzle, don't wait)\nG4 S300;(Delay 5 minutes)\nM107;(Turn off part fan)\nM84;(Turn off stepper motors.)"
  50. },
  51. "machine_width": { "default_value": 120 },
  52. "machine_depth": { "default_value": 120 },
  53. "machine_height": { "default_value": 120 },
  54. "machine_heated_bed": { "default_value": true },
  55. "machine_center_is_zero": { "default_value": false },
  56. "material_diameter": { "default_value": 1.75 },
  57. "machine_nozzle_size": {
  58. "default_value": 0.4,
  59. "minimum_value": 0.15
  60. },
  61. "machine_max_feedrate_x": { "default_value": 150 },
  62. "machine_max_feedrate_y": { "default_value": 150 },
  63. "machine_max_feedrate_z": { "default_value": 1.5 },
  64. "machine_max_feedrate_e": { "default_value": 100 },
  65. "machine_max_acceleration_x": { "default_value": 800 },
  66. "machine_max_acceleration_y": { "default_value": 800 },
  67. "machine_max_acceleration_z": { "default_value": 20 },
  68. "machine_max_acceleration_e": { "default_value": 10000 },
  69. "machine_max_jerk_xy": { "default_value": 20 },
  70. "machine_max_jerk_z": { "default_value": 0.4 },
  71. "machine_max_jerk_e": { "default_value": 5},
  72. "adhesion_type": { "default_value": "raft" },
  73. "raft_margin": { "default_value": 5 },
  74. "raft_airgap": { "default_value": 0.2625 },
  75. "raft_base_thickness": { "value": "0.30625" },
  76. "raft_interface_thickness": { "value": "0.21875" },
  77. "raft_surface_layers": { "default_value": 1 },
  78. "skirt_line_count": { "default_value": 2},
  79. "brim_width" : { "default_value": 5},
  80. "start_layers_at_same_position": { "default_value": true},
  81. "retraction_combing": { "default_value": "noskin" },
  82. "retraction_amount" : { "default_value": 4.5},
  83. "retraction_speed" : { "default_value": 40},
  84. "coasting_enable": { "default_value": true },
  85. "prime_tower_enable": { "default_value": false}
  86. }
  87. }