grr_neo.def.json 2.2 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152
  1. {
  2. "version": 2,
  3. "name": "German RepRap Neo",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Simon Cor",
  8. "manufacturer": "German RepRap",
  9. "file_formats": "text/x-gcode",
  10. "icon": "icon_ultimaker.png",
  11. "platform": "grr_neo_platform.stl"
  12. },
  13. "overrides": {
  14. "machine_name": { "default_value": "German RepRap Neo" },
  15. "machine_width": {
  16. "default_value": 150
  17. },
  18. "machine_height": {
  19. "default_value": 150
  20. },
  21. "machine_depth": {
  22. "default_value": 150
  23. },
  24. "machine_center_is_zero": {
  25. "default_value": false
  26. },
  27. "machine_nozzle_size": {
  28. "default_value": 0.5
  29. },
  30. "machine_head_polygon": {
  31. "default_value": [
  32. [-75, -18],
  33. [-75, 35],
  34. [18, 35],
  35. [18, -18]
  36. ]
  37. },
  38. "gantry_height": {
  39. "default_value": 55
  40. },
  41. "machine_gcode_flavor": {
  42. "default_value": "RepRap (Marlin/Sprinter)"
  43. },
  44. "machine_start_gcode": {
  45. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG91 ;relative positioning\nG1 Y-10.0000 F9000 ;compensate firmware head move 1cm right after endstop\nG92 Y0 ;zero Y\nG90 ;absolute positioning\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
  46. },
  47. "machine_end_gcode": {
  48. "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
  49. }
  50. }
  51. }