fabtotum.def.json 4.1 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970
  1. {
  2. "version": 2,
  3. "name": "FABtotum Personal Fabricator",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "FABtotum",
  8. "manufacturer": "FABtotum",
  9. "category": "Other",
  10. "file_formats": "text/x-gcode",
  11. "platform": "fabtotum_platform.stl",
  12. "icon": "fabtotum_platform.png",
  13. "has_machine_quality": true,
  14. "has_variants": true,
  15. "variants_name": "Head",
  16. "preferred_variant_name": "Lite 0.4 mm",
  17. "preferred_material": "fabtotum_pla",
  18. "supports_usb_connection": false
  19. },
  20. "overrides": {
  21. "machine_name": { "default_value": "FABtotum Personal Fabricator" },
  22. "machine_start_gcode": {
  23. "default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM300 S2 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \n;print"
  24. },
  25. "machine_end_gcode": {
  26. "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM300 S2 ;FAB bep bep (end print)"
  27. },
  28. "gantry_height": { "default_value": 55 },
  29. "machine_width": { "default_value": 214 },
  30. "machine_height": { "default_value": 241.5 },
  31. "machine_depth": { "default_value": 234 },
  32. "machine_center_is_zero": { "default_value": false },
  33. "machine_heated_bed": { "default_value": true },
  34. "machine_nozzle_size": { "default_value": 0.4 },
  35. "machine_head_with_fans_polygon": { "default_value": [[-75, 35], [-75, -18], [18, 35], [18, -18]] },
  36. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  37. "machine_max_feedrate_x": { "default_value": 250 },
  38. "machine_max_feedrate_y": { "default_value": 250 },
  39. "machine_max_feedrate_z": { "default_value": 15 },
  40. "machine_max_acceleration_x": { "default_value": 10000 },
  41. "machine_max_acceleration_y": { "default_value": 10000 },
  42. "machine_max_acceleration_z": { "default_value": 50 },
  43. "machine_max_acceleration_e": { "default_value": 100 },
  44. "machine_acceleration": { "default_value": 4000 },
  45. "machine_max_jerk_xy": { "default_value": 25.0 },
  46. "machine_max_jerk_z": { "default_value": 0.4 },
  47. "machine_max_jerk_e": { "default_value": 1.0 },
  48. "retraction_hop_enabled": { "default_value": false },
  49. "material_diameter": { "default_value": 1.75 },
  50. "material_final_print_temperature": { "value": "material_print_temperature - 5" },
  51. "material_initial_print_temperature": { "value": "material_print_temperature" },
  52. "travel_avoid_distance": { "default_value": 1, "value": 1 },
  53. "speed_travel": { "default_value": 200, "value": 200 },
  54. "speed_infill": { "value": "round(speed_print * 1.05, 0)" },
  55. "speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
  56. "speed_wall": { "value": "speed_print" },
  57. "speed_wall_0": { "value": "round(speed_print * 0.9, 0)" },
  58. "speed_wall_x": { "value": "speed_wall" },
  59. "speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
  60. "speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
  61. "skirt_brim_speed": { "value": "speed_layer_0" },
  62. "skirt_line_count": { "default_value": 3 },
  63. "skirt_brim_minimal_length": { "default_value": 150 },
  64. "infill_sparse_density": { "default_value": 24 },
  65. "top_bottom_thickness": { "default_value": 0.6 },
  66. "support_z_distance": { "default_value": 0.2, "value": "min(2 * layer_height, machine_nozzle_size * 0.75)" },
  67. "support_interface_enable": { "default_value": true }
  68. }
  69. }