abax_pri3.def.json 2.8 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182
  1. {
  2. "name": "ABAX PRi3",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "ABAX 3d Technologies",
  8. "manufacturer": "ABAX 3d Technologies",
  9. "file_formats": "text/x-gcode"
  10. },
  11. "overrides": {
  12. "machine_start_gcode": {
  13. "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --"
  14. },
  15. "machine_end_gcode": {
  16. "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --"
  17. },
  18. "machine_width": {
  19. "default_value": 225
  20. },
  21. "machine_depth": {
  22. "default_value": 220
  23. },
  24. "machine_height": {
  25. "default_value": 200
  26. },
  27. "machine_heated_bed": {
  28. "default_value": false
  29. },
  30. "machine_center_is_zero": {
  31. "default_value": false
  32. },
  33. "machine_gcode_flavor": {
  34. "default_value": "RepRap"
  35. },
  36. "layer_height": {
  37. "default_value": 0.2
  38. },
  39. "layer_height_0": {
  40. "default_value": 0.2
  41. },
  42. "wall_thickness": {
  43. "default_value": 1
  44. },
  45. "top_bottom_thickness": {
  46. "default_value": 1
  47. },
  48. "bottom_thickness": {
  49. "default_value": 1
  50. },
  51. "material_print_temperature": {
  52. "default_value": 200
  53. },
  54. "material_bed_temperature": {
  55. "default_value": 0
  56. },
  57. "material_diameter": {
  58. "default_value": 1.75
  59. },
  60. "speed_print": {
  61. "default_value": 40
  62. },
  63. "speed_infill": {
  64. "default_value": 70
  65. },
  66. "speed_wall": {
  67. "default_value": 25
  68. },
  69. "speed_topbottom": {
  70. "default_value": 15
  71. },
  72. "speed_travel": {
  73. "default_value": 150
  74. },
  75. "speed_layer_0": {
  76. "default_value": 30
  77. },
  78. "support_enable": {
  79. "default_value": true
  80. }
  81. }
  82. }