Cura/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg

[general]
definition = ultimaker_s5
name = Extra Fast - Experimental
version = 4

[metadata]
is_experimental = True
material = generic_bam
quality_type = verydraft
setting_version = 23
type = quality
variant = AA 0.4
weight = -3

[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
speed_topbottom = =math.ceil(speed_print * 35 / 70)
speed_wall = =math.ceil(speed_print * 50 / 70)
speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
support_angle = 45
support_bottom_distance = 0.3
support_interface_density = =min(extruderValues('material_surface_energy'))
support_interface_enable = True
support_top_distance = 0.3
top_bottom_thickness = 1