Cura/resources/definitions/ultimaker2.def.json

{
    "version": 2,
    "name": "Ultimaker 2",
    "inherits": "ultimaker",
    "metadata":
    {
        "visible": true,
        "author": "Ultimaker",
        "manufacturer": "Ultimaker B.V.",
        "file_formats": "text/x-gcode",
        "platform": "ultimaker2_platform.obj",
        "exclude_materials": [
            "generic_bam",
            "generic_cffcpe",
            "generic_cffpa",
            "generic_flexible",
            "generic_gffcpe",
            "generic_gffpa",
            "generic_hips",
            "generic_petcf",
            "generic_petg",
            "generic_pva",
            "generic_tough_pla",
            "structur3d_",
            "ultimaker_bam",
            "ultimaker_petcf",
            "ultimaker_petg",
            "ultimaker_pva",
            "ultimaker_tough_pla"
        ],
        "firmware_file": "MarlinUltimaker2.hex",
        "has_machine_quality": true,
        "has_materials": false,
        "machine_extruder_trains": { "0": "ultimaker2_extruder_0" },
        "platform_offset": [
            9,
            0,
            0
        ],
        "platform_texture": "Ultimaker2backplate.png",
        "preferred_variant_name": "0.4 mm",
        "weight": 3
    },
    "overrides":
    {
        "cool_fan_speed_0": { "value": 0 },
        "gantry_height": { "value": "48" },
        "layer_height_0": { "value": 0.3 },
        "machine_acceleration": { "default_value": 3000 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 223 },
        "machine_disallowed_areas":
        {
            "default_value": [
                [
                    [-115, 112.5],
                    [-82, 112.5],
                    [-84, 102.5],
                    [-115, 102.5]
                ],
                [
                    [115, 112.5],
                    [115, 102.5],
                    [110, 102.5],
                    [108, 112.5]
                ],
                [
                    [-115, -112.5],
                    [-115, -104.5],
                    [-84, -104.5],
                    [-82, -112.5]
                ],
                [
                    [115, -112.5],
                    [108, -112.5],
                    [110, -104.5],
                    [115, -104.5]
                ]
            ]
        },
        "machine_end_gcode": { "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"  if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"" },
        "machine_gcode_flavor": { "default_value": "UltiGCode" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-42, 12],
                [-42, -32],
                [62, 12],
                [62, -32]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 205 },
        "machine_max_feedrate_x": { "default_value": 300 },
        "machine_max_feedrate_y": { "default_value": 300 },
        "machine_max_feedrate_z": { "default_value": 40 },
        "machine_name": { "default_value": "Ultimaker 2" },
        "machine_nozzle_head_distance": { "default_value": 3 },
        "machine_nozzle_tip_outer_diameter": { "default_value": 1 },
        "machine_start_gcode": { "value": "\"G0 F3000 Y50 ;avoid prime blob\"  if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 Y50 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" },
        "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
        "machine_width": { "default_value": 223 },
        "material_bed_temperature": { "maximum_value": "110" },
        "material_bed_temperature_layer_0": { "maximum_value": "110" },
        "speed_slowdown_layers": { "value": 2 },
        "support_z_distance": { "value": "0.1" }
    }
}