um2p_pc_0.6_normal.inst.cfg 1.1 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker2_plus
  5. [metadata]
  6. setting_version = 16
  7. type = quality
  8. quality_type = fast
  9. weight = 0
  10. material = generic_pc
  11. variant = 0.6 mm
  12. [values]
  13. adhesion_type = raft
  14. cool_fan_speed = 50
  15. cool_fan_speed_min = 0
  16. cool_min_layer_time = 3
  17. cool_min_speed = 8
  18. infill_overlap = 5
  19. infill_sparse_density = 35
  20. layer_0_z_overlap = 0.22
  21. raft_airgap = 0.52
  22. raft_base_line_spacing = 2.4
  23. raft_base_line_width = 1.2
  24. raft_interface_line_spacing = 1.4
  25. raft_interface_line_width = 1.2
  26. raft_margin = 15
  27. raft_surface_line_width = 0.6
  28. raft_surface_thickness = 0.15
  29. speed_layer_0 = =math.ceil(speed_print * 30 / 45)
  30. speed_print = 45
  31. speed_topbottom = =math.ceil(speed_print * 20 / 45)
  32. speed_travel = 150
  33. speed_wall_0 = =math.ceil(speed_print * 30 / 45)
  34. speed_wall_x = =math.ceil(speed_print * 40 / 45)
  35. support_angle = 45
  36. support_enable = True
  37. support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
  38. support_line_distance = 3.5333
  39. support_pattern = lines
  40. support_z_distance = 0.21
  41. top_bottom_thickness = 0.75
  42. wall_thickness = 1.06