Cura/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg

[general]
version = 4
name = Fast
definition = ultimaker_s3

[metadata]
setting_version = 20
type = quality
quality_type = draft
weight = -2
material = generic_pp
variant = AA 0.4

[values]
brim_width = 20
cool_fan_speed_max = 100
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 7
cool_min_speed = 2.5

infill_overlap = 0
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
infill_wipe_dist = 0.1
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature - 5
material_print_temperature_layer_0 = =material_print_temperature + 5
multiple_mesh_overlap = 0
prime_tower_enable = False
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_count_max = 15
retraction_extra_prime_amount = 0.8
retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
speed_layer_0 = =math.ceil(speed_print * 15 / 25)
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel_layer_0 = 50
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
wall_0_inset = 0