um3_aa0.25_PC_Normal_Quality.inst.cfg 1.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142
  1. [general]
  2. definition = ultimaker3
  3. name = Fine - Experimental
  4. version = 4
  5. [metadata]
  6. is_experimental = True
  7. material = generic_pc
  8. quality_type = normal
  9. setting_version = 22
  10. type = quality
  11. variant = AA 0.25
  12. weight = 0
  13. [values]
  14. adhesion_type = brim
  15. brim_width = 20
  16. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  17. infill_wipe_dist = 0.1
  18. machine_min_cool_heat_time_window = 15
  19. material_print_temperature = =default_material_print_temperature - 10
  20. multiple_mesh_overlap = 0
  21. ooze_shield_angle = 40
  22. prime_tower_enable = True
  23. prime_tower_wipe_enabled = True
  24. raft_airgap = 0.25
  25. retraction_hop = 2
  26. retraction_hop_only_when_collides = True
  27. retraction_min_travel = 0.8
  28. retraction_prime_speed = 15
  29. skin_overlap = 30
  30. speed_print = 50
  31. speed_topbottom = =math.ceil(speed_print * 25 / 50)
  32. speed_travel = 250
  33. speed_wall = =math.ceil(speed_print * 40 / 50)
  34. speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
  35. support_interface_density = 87.5
  36. switch_extruder_prime_speed = 15
  37. switch_extruder_retraction_amount = 20
  38. switch_extruder_retraction_speeds = 35
  39. wall_0_inset = 0