ultimaker3_extended_bb0.8.inst.cfg 2.7 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586
  1. [general]
  2. name = BB 0.8
  3. version = 2
  4. definition = ultimaker3_extended
  5. [metadata]
  6. author = ultimaker
  7. type = variant
  8. setting_version = 1
  9. [values]
  10. acceleration_enabled = True
  11. acceleration_print = 4000
  12. acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
  13. acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
  14. acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
  15. brim_width = 3
  16. cool_fan_speed = 50
  17. cool_min_speed = 5
  18. infill_line_width = =round(line_width * 0.8 / 0.7, 2)
  19. infill_overlap = 0
  20. infill_pattern = triangles
  21. infill_wipe_dist = 0
  22. jerk_enabled = True
  23. jerk_print = 25
  24. jerk_support = =math.ceil(jerk_print * 15 / 25)
  25. jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
  26. jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
  27. layer_height = 0.2
  28. machine_min_cool_heat_time_window = 15
  29. machine_nozzle_heat_up_speed = 1.5
  30. machine_nozzle_size = 0.8
  31. machine_nozzle_tip_outer_diameter = 2.0
  32. material_print_temperature = =default_material_print_temperature + 10
  33. material_standby_temperature = 100
  34. multiple_mesh_overlap = 0
  35. prime_tower_enable = False
  36. prime_tower_wipe_enabled = True
  37. raft_acceleration = =acceleration_layer_0
  38. raft_airgap = 0
  39. raft_base_speed = 20
  40. raft_base_thickness = 0.3
  41. raft_interface_line_spacing = 0.5
  42. raft_interface_line_width = 0.5
  43. raft_interface_speed = 20
  44. raft_interface_thickness = 0.2
  45. raft_margin = 10
  46. raft_speed = 25
  47. raft_surface_layers = 1
  48. retraction_amount = 4.5
  49. retraction_count_max = 15
  50. retraction_extrusion_window = =retraction_amount
  51. retraction_hop = 2
  52. retraction_hop_enabled = True
  53. retraction_hop_only_when_collides = True
  54. retraction_min_travel = 5
  55. retraction_prime_speed = 15
  56. skin_overlap = 5
  57. speed_layer_0 = 20
  58. speed_print = 35
  59. speed_support = =math.ceil(speed_print * 25 / 35)
  60. speed_support_interface = =math.ceil(speed_support * 20 / 25)
  61. speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
  62. speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
  63. support_angle = 60
  64. support_bottom_height = =layer_height * 2
  65. support_bottom_pattern = zigzag
  66. support_bottom_stair_step_height = =layer_height
  67. support_infill_rate = 25
  68. support_interface_enable = True
  69. support_interface_height = =layer_height * 5
  70. support_interface_skip_height = =layer_height
  71. support_join_distance = 3
  72. support_line_width = =round(line_width * 0.4 / 0.35, 2)
  73. support_offset = 1.5
  74. support_pattern = triangles
  75. support_use_towers = False
  76. support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
  77. support_xy_distance_overhang = =wall_line_width_0 / 4
  78. support_z_distance = 0
  79. switch_extruder_prime_speed = 15
  80. switch_extruder_retraction_amount = 12
  81. top_bottom_thickness = 1
  82. wall_0_inset = 0
  83. wall_line_width_x = =wall_line_width
  84. wall_thickness = 1