123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384 |
- {
- "id": "vertex_k8400",
- "version": 2,
- "name": "Vertex K8400",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "manufacturer": "Velleman",
- "category": "Other",
- "file_formats": "text/x-gcode",
- "icon": "icon_ultimaker2",
- "platform": "Vertex_build_panel.stl",
- "platform_offset": [0, -2, 0],
- "supports_usb_connection": true,
- "supported_actions": ["MachineSettingsAction"]
- },
- "overrides": {
- "machine_name": { "default_value": "Vertex K8400" },
- "machine_heated_bed": {
- "default_value": true
- },
- "material_bed_temperature": {
- "default_value": 0
- },
- "material_bed_temperature_layer_0": {
- "default_value": 0
- },
- "machine_width": {
- "default_value": 200
- },
- "machine_height": {
- "default_value": 190
- },
- "machine_depth": {
- "default_value": 200
- },
- "machine_disallowed_areas": { "default_value": [
- [[-100,100],[-100,80],[100,80],[100,100]]
- ]},
- "machine_center_is_zero": {
- "default_value": false
- },
- "machine_nozzle_size": {
- "default_value": 0.35
- },
- "material_diameter": {
- "default_value": 1.75
- },
- "machine_head_polygon": {
- "default_value": [
- [-60, -18],
- [-60, 40],
- [18, 40],
- [18, -18]
- ]
- },
- "machine_head_with_fans_polygon": {
- "default_value": [
- [-60, -40],
- [-60, 40],
- [18, 40],
- [18, -40]
- ]
- },
- "gantry_height": {
- "default_value": 18
- },
- "machine_nozzle_heat_up_speed": {
- "default_value": 2
- },
- "machine_nozzle_cool_down_speed": {
- "default_value": 2
- },
- "machine_gcode_flavor": {
- "default_value": "RepRap (Marlin/Sprinter)"
- },
- "machine_start_gcode": {
- "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
- },
- "machine_end_gcode": {
- "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
- }
- }
- }
|