Cura/resources/definitions/rigidbot.def.json

{
    "id": "rigidbot",
    "version": 2,
    "name": "RigidBot",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "RBC",
        "manufacturer": "RigidBot",
        "category": "Other",
        "file_formats": "text/x-gcode",
        "platform": "rigidbot_platform.stl"
    },

    "overrides": {
        "machine_name": { "default_value": "RigidBot" },
        "machine_width": {
            "default_value": 254
        },
        "machine_depth": {
            "default_value": 254
        },
        "machine_height": {
            "default_value": 254
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "machine_nozzle_heat_up_speed": {
            "default_value": 2
        },
        "machine_nozzle_cool_down_speed": {
            "default_value": 2
        },
        "gantry_height": {
            "default_value": 0
        },
        "machine_gcode_flavor": {
            "default_value": "RepRap (Marlin/Sprinter)"
        },
        "machine_start_gcode": {
            "default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
        },
        "machine_end_gcode": {
            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning"
        },
        "layer_height": {
            "default_value": 0.2
        },
        "wall_thickness": {
            "default_value": 0.8
        },
        "top_bottom_thickness": {
            "default_value": 0.3
        },
        "material_print_temperature": {
            "default_value": 195
        },
        "material_bed_temperature": {
            "default_value": 60
        },
        "material_diameter": {
            "default_value": 1.75
        },
        "speed_print": {
            "default_value": 60
        },
        "speed_infill": {
            "default_value": 100
        },
        "speed_topbottom": {
            "default_value": 15
        },
        "speed_travel": {
            "default_value": 150
        },
        "speed_layer_0": {
            "default_value": 15,
            "minimum_value": "0.1"
        },
        "infill_overlap": {
            "default_value": 10
        },
        "cool_fan_enabled": {
            "default_value": false
        },
        "cool_fan_speed": {
            "default_value": 0
        },
        "skirt_line_count": {
            "default_value": 3
        },
        "skirt_gap": {
            "default_value": 4
        },
        "skirt_brim_minimal_length": {
            "default_value": 200
        }
    }
}