| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- {
- "id": "rigid3d_3rdgen",
- "name": "Rigid3D 3rdGen",
- "version": 2,
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Ultimaker",
- "manufacturer": "Rigid3D",
- "category": "Other",
- "file_formats": "text/x-gcode",
- "platform_offset": [ 0, 0, 0]
- },
- "overrides": {
- "machine_start_gcode": {
- "default_value": " ; -- START GCODE --\n G21\n G28 ; Home extruder\n G29 ; Autolevel bed\n M107 ; Turn off fan\n G90 ; Absolute positioning\n M82 ; Extruder in absolute mode\n G92 E0 ; Reset extruder position\n ; -- end of START GCODE --\n\n"
- },
- "machine_end_gcode": {
- "default_value": " ; -- END GCODE --\n G1 X0 Y230 ; Get extruder out of way.\n M107 ; Turn off fan\n G91 ; Relative positioning\n G0 Z20 ; Lift extruder up\n T0\n G1 E-1 ; Reduce filament pressure\n M104 T0 S0 ; Turn extruder heater off\n G90 ; Absolute positioning\n G92 E0 ; Reset extruder position\n M140 S0 ; Disable heated bed\n M84 ; Turn steppers off\n ; -- end of END GCODE --\n"
- },
- "machine_head_polygon": { "default_value": [[ 18, 0], [ 18, 65], [ 32, 65], [ 32, 0]] },
- "cool_min_layer_time": { "default_value": 10 },
- "prime_tower_size": { "default_value": 7.745966692414834 },
- "skirt_gap": { "default_value": 5.0 },
- "speed_travel": { "default_value": 120 },
- "bottom_thickness": { "default_value": 0.75 },
- "material_diameter": { "default_value": 1.75 },
- "layer_height_0": { "default_value": 0.25 },
- "support_angle": { "default_value": 45 },
- "material_bed_temperature": { "default_value": 100 },
- "retraction_min_travel": { "default_value": 2 },
- "speed_wall_0": { "default_value": 30 },
- "retraction_speed": { "default_value": 60.0 },
- "wall_thickness": { "default_value": 0.8 },
- "material_print_temperature": { "default_value": 235 },
- "retraction_amount": { "default_value": 1 },
- "speed_topbottom": { "default_value": 25 },
- "layer_height": { "default_value": 0.25 },
- "top_thickness": { "default_value": 0.75 },
- "machine_extruder_count": { "default_value": 1 },
- "machine_heated_bed": { "default_value": true },
- "machine_center_is_zero": { "default_value": false },
- "machine_height": { "default_value": 240 },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_depth": { "default_value": 290 },
- "machine_width": { "default_value": 275 },
- "machine_name": { "default_value": "Rigid3D 3rd Geneartion" }
- }
- }
|
