Cura/resources/definitions/makeit_pro_l.def.json

{
    "id": "makeit_pro_l",
    "version": 2,
    "name": "MAKEiT Pro-L",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "NA",
        "manufacturer": "NA",
        "category": "Other",
        "file_formats": "text/x-gcode",
        "has_materials": false,
        "supported_actions": [ "MachineSettingsAction", "UpgradeFirmware" ],
        "machine_extruder_trains":
        {
            "0": "makeit_l_dual_1st",
            "1": "makeit_l_dual_2nd"
        }
    },

    "overrides": {
        "machine_name": { "default_value": "MAKEiT Pro-L" },
        "machine_width": {
            "default_value": 305
        },
        "machine_height": {
            "default_value": 330
        },
        "machine_depth": {
            "default_value": 254
        },
        "machine_center_is_zero": {
            "default_value": false
        },
        "machine_nozzle_size": {
            "default_value": 0.4
        },
        "machine_nozzle_heat_up_speed": {
            "default_value": 2
        },
        "machine_nozzle_cool_down_speed": {
            "default_value": 2
        },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [ -305, 28 ],
                [ -305, -28 ],
                [ 305, 28 ],
                [ 305, -28 ]
            ]
        },
        "gantry_height": {
            "default_value": 330
        },
        "machine_use_extruder_offset_to_offset_coords": {
            "default_value": true
        },
        "machine_gcode_flavor": {
            "default_value": "RepRap (Marlin/Sprinter)"
        },
        "machine_start_gcode": {
            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..."
        },
        "machine_end_gcode": {
            "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-5 F9000  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5 X+20 Y+20 F9000 ;move Z up a bit\nM117 MAKEiT Pro@Done\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM81"
        },
        "machine_extruder_count": {
            "default_value": 2
        },
        "print_sequence": {
            "enabled": true
        },
        "prime_tower_position_x": {
            "default_value": 185
        },
        "prime_tower_position_y": {
            "default_value": 160
        },
        "material_diameter": {
          "default_value": 1.75
        },
        "layer_height": {
          "default_value": 0.2
        },
        "retraction_speed": {
          "default_value": 180
        },
        "infill_sparse_density": {
          "default_value": 20
        },
        "retraction_amount": {
          "default_value": 6
        },
        "retraction_min_travel": {
          "default_value": 1.5
        },
        "speed_travel": {
          "default_value": 150
        },
        "speed_print": {
          "default_value": 60
        },
        "wall_thickness": {
          "default_value": 1.2
        },
        "bottom_thickness": {
          "default_value": 0.2
        },
        "speed_layer_0": {
          "default_value": 20
        },
        "speed_print_layer_0": {
          "default_value": 20
        },
        "cool_min_layer_time_fan_speed_max": {
          "default_value": 5
        },
        "adhesion_type": {
          "default_value": "skirt"
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "machine_heat_zone_length": {
            "default_value": 20
        }
    }
}